Download MicroFlex Installation Manual

6.3.3 Other tools and windows
Each tool and window is explained fully in the help file, so is not described here in detail.
H
Edit & Debug Tool
This tool provides a work area including the Command window and Output window. The
Command window can be used to send immediate Mint commands to the MicroFlex.
H
Scope Tool
Displays the capture screen. This screen is also shown when the Fine-tuning tool is
selected.
H
Spy window
Allows you to monitor all the important parameters for the axis.
Remember, for help on each tool just press F1 to display the help file, then navigate to the
WorkBench v5 book. Inside this is the Toolbox book.
6-10 Configuration
MN1919