Download NI-CAN User Manual - National Instruments

Index
PXI-8462
fault reporting capabilities, G-3
PXI-846x series boards
and RTSI interface, 1-10, G-3
hardware overview, 1-9
pins used by, G-3
choosing NI-CAN Objects
CAN Network Interface Objects, 2-4
CAN Objects, 2-5
detecting state changes, 3-4
interaction of NI-CAN software with your
application (figure), 1-16
LabVIEW RT, 2-1
model for NI-CAN applications
closing objects, 2-10
communicating using objects, 2-9
configuring objects, 2-9
general program steps (figure), 2-8
opening objects, 2-9
reading data, 2-10
starting communication, 2-9
waiting for available data, 2-10
queues
disabling queues, 3-2
empty queues, 3-2
full queues, 3-2
read and write queues, 3-1
state transitions, 3-1
synchronizing RTSI bus with
NI-DAQ, 1-17
PXI, CompactPCI, and RTSI, G-3
PXI-8460
fault reporting capabilities, G-3
parts locator diagram (figure), E-4
port characteristics for bus-powered
ports, H-2
replacing termination resistors, E-10
termination resistors
location of, (figure), E-11
preparing lead wires of,
(figure), E-11
PXI-8461
fault reporting capabilities, G-3
parts locator diagram (figure), D-5
port characteristics, H-2
© National Instruments Corporation
Q
questions. See troubleshooting and common
questions.
queues
disabling queues, 3-2
empty queues, 3-2
full queues, 3-2
read and write queues, 3-1
state transitions, 3-1
R
reading data, 2-10
Real-Time System Integration (RTSI). See
RTSI.
related documentation, xiv
Remote Transmit Request (RTR) field, 1-4
resistance, determining termination, E-7
resistor
termination
high-speed CAN (figure), D-8
location on PCI-CAN/LS2 board
(figure), E-9
low-speed CAN (figure), E-6
preparing lead wires of replacement
PCI-CAN/LS2 (figure), E-10
PCMCIA-CAN/LS cable
(figure), E-12
replacing
low-speed CAN, E-10
PCI-CAN/LS board, E-9
PCMCIA-CAN/LS cable, E-12
Index-7
NI-CAN User Manual