Download SINUS PENTA USER MANUAL

INSTALLATION GUIDE
SINUS PENTA
REVISION INDEX
The following subjects covered in this User Manual (Installation Instructions) R.06.2 have been added,
changed or suppressed in respect to revision R.06.
The User Manuals mentioned in this manual have been added below.
The following sections: Nameplate, Transport and Handling, Unpacking, Scheduled Maintenance have been
added.
Warnings concerning Motor and bearings insulation protection, Sensors integrated in the motor, Critical
torsional speeds, Transient torque analysis have been added.
Notes concerning Installation clearance, Touch current in the ground conductor, Decisive voltage class
according to IEC 61800-5-1 for terminal boards have been added.
A section covering additional safety standards for permanent magnets motors has been added.
In the Modular IP00 STAND-ALONE Models (S64–S90) section, Partial dimensions, Partial weights and
Partial power dissipation have been removed (only Overall dimensions, Overall weights and Overall power
dissipation are now mentioned).
The noise levels (db(A)) for stand-alone models and modular models have been added. No noise levels have
been added for the Box and Cabinet models.
The phrase “The precharge circuit of DC-bus capacitors is not present” has been better explained and
replaced with “The precharge circuit of DC-bus capacitors is not present (in S64, S74 and S84 ) or upstream
of the DC power supply terminals (in S41, S42, S51, S52, S60)”.
The phrase “DC current power supply” has been replaced with “DC voltage power supply”.
The term “reactor” has been replaced with “inductor”.
The IP54 models, S05 0020 2T and S14 0032 5T/6T, have been removed because unavailable.
Maximum surrounding air temperature increased to 55°C following the Type Tests required by DNV Marine
Certification.
SANTERNO USER MANUALS MENTIONED IN THIS
INSTALLATION GUIDE
The following Santerno User Manuals are mentioned throughout this Installation Guide:
- 15R0102B1 Sinus Penta - Programming Guide
- 15N0102B1 Sinus Penta - ES821 Spare User Manual
- 15Q0102B00 Sinus Penta - Guide to the Regenerative Application
- 15Q0102B10 Sinus Penta - Guide to the Multipump Application
- 15Q0102B200 Sinus Penta - Guide to the Synchronous Motor Application
- 15P0101B1 Sinus Penta - Assembly Instructions for Modular Inverters
- 15G0010B1 PROFIdrive COMMUNICATIONS BOARD - Installation and Programming Instructions
- 15G0851B100 DATA LOGGER ES851 - Programming Instructions
- 16B0901B1 Remote Drive DRIVE REMOTE CONTROL - User Manual
- 15M0102B10 Sinus Penta - Guide for Capacitor Reforming
2/418