Download HY11S14 HYCON-IDE Software User`s Manual

HY11S14
HYCON-IDE Software User’s Manual
4.2 Operation Procedures
Figure 72
Open  Open the programmed source code main file.
Open Project  Open the saved project.
Save Project  Save the finished project.
Download file to Flash Memory  Download the finished Hex file after assembly to
programmer or IDE Flash Memory.
Read the code from Flash Memory  Read the code of programmer Flash Memory.
(Attention: if the code was protective, the data will not be
revealed.)
.
© 2011-2012 HYCON Technology Corp
www.hycontek.com
APD-HYIDE006-V04_EN
page 57