Download LP755 User Guide - Projector Central

Transcript
M
a
i
n
t
e
n
a
n
c
e
&
T
r
o
u
b
l
e
s
h
o
o
t
i
n
g
FIGURE 30
Removing the lamp module
7 Align the new lamp module in the correct direction.
WARNING: Do not drop the
lamp module or touch the glass
bulb! The glass may shatter and
cause injury.
8 Gently push the module in as far as it goes.
9 Tighten the screws on the outside of the module.
10 Reposition the lamp door.
11 Tighten the lamp door screw.
12 Plug in the power cord and turn the projector back on. The
lamp monitor light and lamp hour counter in the Status menu
are automatically reset.
40