Download rvsEVO - SPIRIT

rvsEVO Benutzerhandbuch
Optional parameters (enclosed in parentheses)
184
ALG
Active only in connection with OFTP 2.0 (CMS).
The following algorithms are possible:
– None
– 3DES
– AES
(GUI name: Encryption Algorithm)
CODEOUT
Desired code of data set at receiver; (A=ASCII,
E=EBCDIC)
Example:
send /c dsn=C:\test22.dat CODEIN=A
FORMAT=V(SID=RTT CODEOUT=E
DSNNEW=FIX0GBE.TEXT)
CODETABLE
Defines the code table, which is to be used for the
code conversion (see Parameter Conversion
table in the table in chapter 4.5) . Indicate the
alias name of conversion table.
Example: send /c
dsn=c:\programs\rvsEVO\files\outbox\
test22.dat FORMAT=V(SID=RTT
CODETABLE=ASCII-IBM037 MAXRECL=80
DNSNEW=FIX0GBE.TEXT).
(GUI name: Conversion table)
COMPRESSION
compression; active only in connection with
sfs=2, 3 oder 4. If Y (Yes) the file should be
compressed before sending. This parameter has
to be placed after SID parameter.
Example:
SEND /C DSN=\home\test\test11.txt
(SID=RTZ COMPRESSION=Y).
(GUI name: Offline Compression)
DSNNEW
Virtual file name; the length of the file name
used for ODETTE transfer must not exceed 26
characters
(GUI name: VDSN)
ENCRYPTION
File encryption; active only in connection with
sfs=2, 3 oder 4; If Y (Yes) the file should be
encrypted before sending. This parameter has to
be placed after SID parameter.
Example:
SEND /C DSN=\home\test\test11.txt
(SID=RTZ COMPRESSION=Y ENCRYPTION=Y).
FILEDESC
File description, active only in connection with
sfs=4
(OFTP 2.0)
(GUI name: File description)