Download SuperH RISC Engine Simulator/Debugger, User`s Manual

Transcript
column displays the source program or disassembled memory contents corresponding to the
specific address.
Right-clicking on the mouse within the window displays a popup menu. Supported menu options
are described in the following sections:
5.70.1
View Source
Displays the source program or disassembled memory contents for the address in the selected line.
5.70.2
View Profile-List
Displays the Profile-List window.
5.70.3
View Profile-Chart
Displays the Profile-Chart window focused on the function in the specified line.
5.70.4
Enable Profiler
Toggles acquisition profile data. When profile data acquisition is active, a check mark is shown to
the left of the menu text. Profile data and performance analysis data cannot be acquired at a time.
If the profile data acquisition is going to be enabled when the performance analysis data
acquisition is active (when the “Enable Analysis” in the Performance Analysis window is
checked), a warning message box is displayed.
Figure 5.99 Warning Message Box Showing Profiler and Analysis Cannot Be Set at a Time
When [OK] is clicked, the performance analysis data acquisition is disabled and the profile data
acquisition is enabled.
Rev. 3.0, 09/00, page 166 of 276