Download SELECTSET AVANTRA USER GUIDE
Transcript
14 RIP Data Error The RIP sent more data than it specified. Reset. Process the job that generated the error. Make sure that it is complete. If the error persists, call for service. 15 No RIP Check to see if your RIP is running. Check cable connections between RIP and imagesetter. Reset. If the error persists, call for service. 17 Spinner Speed Error Hardware error. Reset. If the error persists, call for service. 22 Spot Aperture Jam The device that adjusts the laser spot size is jammed. Reset. If the error persists, call for service. 23 Boot Diagnostic Error Hardware error detected while attempting to boot. Reset. If the error persists, call for service. 25 Carriage Switch Broken Hardware error. Reset. If the error persists, call for service. Diagnostics and Error Messages • 6–5