Download Operating Instructions

Direct printing
Even if you do not have a computer,
you can easily print images shot using
your camera by connecting the camera
to a PictBridge compliant printer. For
preparation, you only set the USB
connection on the Setup screen and
connect the camera mounted in the Cybershot Station to the printer with the USB
cable.
Using a PictBridge compliant printer easily
prints the index print*.
Single print
Preparing the camera
Set the USB mode on the camera to
connect the camera with a printer.
Before operation
Index print
Set the menu to the Setup screen (pages 54
and 124).
Control button
Mode switch
MENU
* An index print function may not be provided
depending on a printer.
• If you arrange the same image side by side,
select [This image] in single-image mode, then
set [Index] to [On] (page 79).
• The number of images printed on a single
index print differs according to the printer.
 Select
(Setup 2) with ,
then select [USB Connect]
with //.
2
 Select [PictBridge] with /,
then press .
1
2
1
Still image printing
• Using the AC Adaptor is recommended to
prevent the power from turning off partway
through printing.
• You cannot print movies.
• When an error notification is received from
the connected printer, the
indicator flashes
for approximately five seconds. Check the
connected printer.
Setup 2
File Number:
PictBridge
USB Connect:
PTP
Normal
Video Out:
Clock Set:
2
The USB mode is set.
77