Download Christie LA1 Line array speaker

Christie LA1
Line array speaker
Advanced ribbon driver
line array for cinema
The Christie® LA1 line array speaker combines advanced ribbon driver
technology with a unique coaxial articulated line array design to provide
greatly enhanced clarity, dramatically reduced distortion and ultra-fast
transient response. The extremely low mass of the ribbon drivers allows
the Christie LA1 to respond very quickly to signals. This eliminates
the effects of high frequency breakup and power compression while
enabling extended high frequency response and the accurate
reproduction of the original source material.
Key features
Christie exclusive single
enclosure coaxial articulated
line array design
Extremely even coverage,
typically ± 2dB SPL throughout
entire audience area
9 x 3.5" ribbon drivers
and 6 x 5.25" paper/Kevlar
composite cone woofers
Approximately four times
the optimal listening area
than typical systems
Dramatically higher RMS
to peak max SPL ratio than
compression driver systems
Enhanced voice intelligibility,
low distortion and highly
controlled dispersion
Limited five year warranty
MANUFACTURED ACCORDING TO
CHRISTIE DIGITAL SYSTEMS STANDARD # 010-101136-01:
" PACKAGING LABELING AND MATERIAL GUIDELINE "
3. REFER TO SUPPLIER QUALITY STANDARD 010-101164-01
5.08
129.00
FOR GENERAL QUALITY REQUIREMENTS AND PRACTICES,
AND FOR CRITICAL FEATURE INSPECTION METHODS
Sound exactly where it is needed
IF INDICATED WITH
ON THIS SPECIFICATION
Front view
4. NOT ALL DIMENSIONS SHOWN. REFER TO CAD MATH
DATA FOR DETAILS
10.40
264.00
5. WHEN DATUMS ARE SPECIFIED, CAD MATH DATA AND
The Christie LA1 features very wide 120° horizontal dispersion
FOLLOWING PROFILE TOLERANCE APPLIES:
6. PARTS MUST BE CLEANED TO REMOVE DEBRIS, OILS,
and highly controlled 30° vertical dispersion patterns – placing
RESIDUE OR OTHER CONTAMINANTS PRIOR TO SHIPPING
sound exactly where it is needed. The Christie LA1 has a
2-way linear phase, internal passive crossover and can be
51.2
1300
combined with the Christie S115 subwoofer to create a 3-way,
bi-amplified, full range speaker/sub system, ideal as a screen
channel for ±100 seat auditoriums.NOTES:
It is extremely versatile with
1. ALL MATERIALS AND PROCESSES MUST CONFORM
TO THE CHRISTIE
SPECIFICATION 010-100594
a range of applications and installation
options,
from being
2. PACKING FILLERS, BOXES AND LABELS MUST BE
MANUFACTURED ACCORDING TO
mounted to flown.
UNDIMENSIONED FEATURES ARE BASIC, AND THE
9.40
238.00
1.69
43.00
24.0
608
32.60
829.00
REVISION HISTORY OF
REV
DESCRIPTION OF CHANGE
BY
1.69
43.00
CHRISTIE DIGITAL SYSTEMS STANDARD # 010-101136-01:
5.08
129.00
" PACKAGING LABELING AND MATERIAL GUIDELINE "
3. REFER TO SUPPLIER QUALITY STANDARD 010-101164-01
5.08
129.00
Side view
FOR GENERAL QUALITY REQUIREMENTS AND PRACTICES,
AND FOR CRITICAL FEATURE INSPECTION METHODS
IF INDICATED WITH
ON THIS SPECIFICATION
MODEL REV:
4. NOT ALL DIMENSIONS SHOWN. REFER TO CAD MATH
Specifications
DATA FOR DETAILS
USED ON:
5. WHEN DATUMS ribbon
ARE SPECIFIED,
CAD MATH
DATAarray,
AND
articulated
driver
line
2-way, passive,
UNDIMENSIONED FEATURES ARE BASIC, AND THE
in a single FOLLOWING
sealed PROFILE
enclosure
TOLERANCE APPLIES:
® BE CLEANED TO REMOVE DEBRIS, OILS,
• 9 x 3.5" Kapton
6. PARTS MUST
ribbon drivers with Neodymium magnets
Driver components
RESIDUE OR OTHER CONTAMINANTS PRIOR TO SHIPPING
• 6 x 5.25" paper/Kevlar
composite mid-bass cone drivers
• Linear phase, asymmetric, 2-way, passive @ 1.6 kHz, 24dB/octave
Crossover
• 80Hz-20kHz @ -6dB
Frequency response1
• 123dB (AES) continuous • 135dB peak
Maximum SPL2
32.60
• 120° horizontal dispersion • 30° vertical dispersion
System coverage3
829.00
• 95dB (200Hz-3kHz)
Sensitivity1, 1W/1m
• 600W (AES) continuous • 1200W (IEC) short term
Power handling2
• 450-825W (FTC) @ 8 ohms
Recommended amplifier power
• 8 ohms
Rated impedance
• 2 position barrier strip
Input connectors
51.2
1300
• Closed box alignment • 18mm marine plywood
Enclosure
• Heavily damped and braced
• On subwoofer using BKT-LA1 Tilt bracket
Mounting options
NOTES:
NOTES:
• Flown under subwoofer using BKL-LA1
“L” bracket
1. ALL MATERIALS AND PROCESSES MUST CONFORM
1. ALL MATERIALS AND PROCESSES MUST CONFORM
• Wall mounted using 4 x M8 points
TO THE CHRISTIE SPECIFICATION 010-100594
TO THE CHRISTIE SPECIFICATION 010-100594 1.69
43.00
2. PACKING FILLERS, BOXES AND LABELS
MUST BE
• Individually
flown using 3 x M10 points
2. PACKING FILLERS, BOXES AND LABELS MUST BE
MANUFACTURED ACCORDING TO
ACCORDING TO
• Includes a total of 7 x M10 fly points MANUFACTURED
for total versatility
CHRISTIE DIGITAL SYSTEMS STANDARD # 010-101136-01:
CHRISTIE DIGITAL SYSTEMS STANDARD # 010-101136-01:
• Christie
" PACKAGING LABELING AND MATERIAL
GUIDELINE "S115 subwoofer (145-108100-01)
Accessories (optional)
" PACKAGING LABELING AND MATERIAL GUIDELINE "
3. REFER TO SUPPLIER QUALITY STANDARD
010-101164-01
5.08
• BKT-LA1
3. REFER
SUPPLIER QUALITY
010-101164-01
Tilt bracket (145-116109-01)
forTOmounting
onSTANDARD
Christie
S115
129.00
FOR GENERAL QUALITY REQUIREMENTS AND PRACTICES,
GENERAL QUALITY REQUIREMENTS AND PRACTICES,
• BKL-LA1 “L” bracket (145-117100-01)FOR
for
flying under Christie S115
AND FOR CRITICAL FEATURE INSPECTION METHODS
AND FOR CRITICAL FEATURE INSPECTION METHODS
• Allen Products MultiMount MM-024 (111-681207-01)
IF INDICATED WITH
ON THIS SPECIFICATION
IF INDICATED WITH
ON THIS SPECIFICATION
4. NOT ALL DIMENSIONS SHOWN. REFERor
TO CAD
MATH
MM-060
(111-682208-01) for wall4.mounting
NOT ALL DIMENSIONS SHOWN. REFER TO CAD MATH
DATA FOR DETAILS
FOR
DETAILS
• 3 x Allen Products RK-1C Rigging KitDATA
1 x Cable (111-685202-01)4
5. WHEN DATUMS ARE SPECIFIED, CAD MATH DATA AND
5. WHEN DATUMS ARE SPECIFIED, CAD MATH DATA AND
• (LxWxH)
UNDIMENSIONED FEATURES ARE BASIC,
AND THE
10.4 x 9.4 x 32.6" (264 x 238UNDIMENSIONED
x 829mm)FEATURES ARE BASIC, AND THE
Dimensions
9.40
FOLLOWING PROFILE TOLERANCE APPLIES:
FOLLOWING PROFILE TOLERANCE
238.00 APPLIES:
•
Net weight
6. PARTS MUST BE CLEANED TO REMOVE39.5lbs
DEBRIS, OILS,(18kg)
6. PARTS MUST BE CLEANED TO REMOVE DEBRIS, OILS,
RESIDUE OR OTHER CONTAMINANTS
TO SHIPPING
• PRIOR
RESIDUE OR OTHER CONTAMINANTS PRIOR TO SHIPPING
Limited
five year warranty
Warranty
System type
LA1
MECH. REF # :
• Coaxial
MATERIAL:
DEBURRING:
9.40
238.00
Top view
UNITS :
MILLIMETRES
REV
UNLESS OTHERWISE SPECIFIED
NONE
MARK PART NO & VENDOR CODE
(SUPPLIED BY CDS) IN LOCATION
SHOWN
NONE
MICROINCH
63
10.40
264.00
REVISION
HISTORY OF
DRAWN BY:
BY
DRAWN DATE:
MODEL REV:
MECH. REF # :
Christie Digital Systems Canada Inc.
Canada – Kitchener
ph: 519 744 8005
Brazil
ph: +55 (11) 2548 4753
China (Beijing)
ph: +86 10 6561 0240
China (Shanghai)
ph: +86 21 6278 7708
USED ON:
LA1
Echo
FINISH:
France COATING: NONE
ph: +33 (0) 1 41 MARK
21PART
44NO 04
& VENDOR CODE
I.D :
(SUPPLIED BY CDS) IN LOCATION
SHOWN
NONE
Germany SIMILAR TO:
ph: +49 2161 664540
India
ph: +91 (080) 6708 9999
UNITS :
MILLIMETRES
UNLESS OTHERWISE SPECIFIED
Japan (Tokyo)
ph: 81 3 3599 7481
INTERPRET DIMENSIONS AND TOLERANCES
PER ASME Y14.5M-1994
ALL DIMENSIONS SHOWN APPLY BEFORE
PLATINGS AND COATINGS
TOLERANCES APPLY AS SHOWN BELOW
OTHERWISE, SEE NOTE 5
INCHES
MILLIMETRES
DECIMAL PLACES
± .005
.XXX
± 0.1
± .010
.XX
± 0.3
± .020
.X
± 0.5
ANGULAR DIMENSIONS
PROPRIETARY
NOT TO BE DISCLOSED OR REPRODUCED IN ANY
MANNER WITHOUT THE EXPRESS WRITTEN
PERMISSION OF CHRISTIE
SIZE
THIRD ANGLE PROJECTION
Korea (Seoul)
ph: +82 2 702 1601
Republic of South Africa
ph: +27 (0)11 510 0094
XX°
XX.X°
SURFACE
ROUGHNESS
± 0.5º
± 0.1º
MICROINCH
63
Singapore
ph: +65 6877 8737
Spain
ph: +34 91 633 9990
MICRON
1.6
NUMBER
B
SCALE
MICRON
1.6
MASS
1:10
5.08
129.00
14.92
379.00
32.60
829.00
DRAWN BY:
1.69
43.00
UNITS :CHRISTIEMILLIMETRES
DIGITAL SYSTEMS
DESCRIPTION
NONE
United Kingdom
FINISH:
ph: +44 (0) 118 977 8000NONE
NOT TO BE DISCLOSED OR REPRODUCED IN ANY
MANNER WITHOUT THE EXPRESS WRITTEN
PERMISSION OF CHRISTIE
SIZE
THIRD ANGLE PROJECTION
B
COATING:
NUMBER
MARK PART NO & VENDOR CODE
(SUPPLIED BY CDS)
MASSIN LOCATION
SHOWN
LBS[
NONE
Independent sales1:10
consultant offices
SCALE
I.D :
SIMILAR TO:
Italy
ph: +39 (0) 2 9902 1161
For the most current specification information, please visit www.christiedigital.com
Copyright 2015 Christie Digital Systems USA, Inc. All rights reserved. All brand names and product names are trademarks, registered trademarks
or tradenames of their respective holders. Christie Digital Systems Canada Inc.’s management system is registered to ISO 9001 and ISO 14001.
Performance specifications are typical. Due to constant research, specifications are subject to change without notice.
Printed in Canada on recycled paper. 3923 Jan 15
DRAWN BY:
DRAWN DATE:
INTERPRET DIMENSIONS
ANDDIGITAL
TOLERANCES
CHRISTIE
SYSTEMS APPROVED BY:
PER ASME Y14.5M-1994
CANADA
INC.
ALL DIMENSIONS SHOWN APPLY
BEFORE
APPROVAL DATE:
PLATINGS AND COATINGS
TOLERANCES APPLY AS SHOWN BELOW
OTHERWISE, SEE NOTE 5
PROPRIETARY
INCHES
MILLIMETRES NOT TO BE DISCLOSED OR REPRODUCED IN ANY
DECIMAL PLACES
MANNER WITHOUT THE EXPRESS WRITTEN
± .005
.XXX
± 0.1
PERMISSION OF CHRISTIE
± .010
.XX
± 0.3
REVISION
± .020
.X
± 0.5
ANGULAR DIMENSIONS
THIRD ANGLE PROJECTION
BREAK ALL EDGES FOR SAFE
HANDLING
DEBURRING:
14.92
379.00
5.08
129.00
USA, INC.
UNLESS OTHERWISE SPECIFIED
Echo
APPROVAL DATE:
PROPRIETARY
5.31
135.00
5.00
127.00
LA1
USED ON:
1
1.38
35.00
12.56
319.00
MODEL REV:
MECH. REF # :
United Arab Emirates
ph: +971 4 3206688MATERIAL:
SHEET
9.40
238.00
2.76
70.00
DRAWN DATE:
LBS[ KG]
10.40
264.00
1.38
35.00
APPROVED BY:
CHRISTIE DIGITALREV
SYS
USA, INC.
CHRISTIE DIGITAL SYS
CANADA INC
1.69
43.00
DESCRIPTION
APPROVAL DATE:
5.08
129.00
Eastern Europe and
MATERIAL:
Russian Federation
BREAK ALL EDGES FOR SAFE
DEBURRING:
ph: +36 (0) 1 47HANDLING
48 100
NONE
DATE UPDATED
Back view
1.69
43.00
Australia
ph: +61 (0) 7 3624 4888
B
SCA
12.56
319.00
APPROVED BY:
5.31
135.00
easured at distances of 4m and 8m, in free field and on ground plane. Sensitivity is calculated based on measured
M
SPL response averaged in 200Hz-3kHz range and scaled back to 1m.
2 AES refers to AES2-2012 standard. IEC refers to IEC 60268-5 standard. Max continuous SPL calculated based on sensitivity
32.60
and AES power handling. IEC short-term power tested using IEC pink noise with 9dB
crest factor. The crest factor was specifically
829.00
increased to reflect real-life parameters of digital cinema sound tracks. Maximum peak
SPL calculated using peak voltage during
IEC short-term power test.
3 Averaged in 500Hz-16kHz range, at -6dB. Screen scattering effect will result in slight increase of coverage at HF.
4 3 cables required when flown. See User Manual for details.
Christie Digital Systems USA, Inc.
USA – Cypress
ph: 714 236 8610
SIZE
THIRD ANGLE PROJECTION
MICRON
1.6
2.
70
± 0.5º
± 0.1º
XX°
XX.X°
SURFACE
ROUGHNESS
1
Worldwide offices
MICROINCH
63
14.92
379.00
DESCRIPTION OF CHANGE
INTERPRET DIMENSIONS AND TOLERANCES
PER ASME Y14.5M-1994
ALL DIMENSIONS SHOWN APPLY BEFORE
PLATINGS AND COATINGS
TOLERANCES APPLY AS SHOWN BELOW
OTHERWISE, SEE NOTE 5
INCHES
MILLIMETRES
DECIMAL PLACES
± .005
.XXX
± 0.1
± .010
.XX
± 0.3
± .020
.X
± 0.5
ANGULAR DIMENSIONS
NONE
Corporate offices
DESC
5.08
51.2
129.00
1300
FINISH:
I.D :
PROPRIETARY
NOT TO BE DISCLOSED OR REPRODUCED IN ANY
MANNER WITHOUT THE EXPRESS WRITTEN
PERMISSION OF CHRISTIE
24.0
608
BREAK ALL EDGES FOR SAFE
HANDLING
SIMILAR TO:
APPROVAL DATE:
± 0.5º
± 0.1º
XX°
XX.X°
SURFACE
ROUGHNESS
24.0
608
MATERIAL:
COATING:
APPROVED BY:
5.00
127.00
Echo
DEBURRING:
MARK PART NO & VENDOR CODE
(SUPPLIED BY CDS) IN LOCATION
SHOWN
NONE
1.69
43.00
LA1
USED ON:
1.38
35.00
NONE
SIMILAR TO:
DRAWN DATE:
5.31
135.00
BREAK ALL EDGES FOR SAFE
HANDLING
NONE
I.D :
DRAWN BY:
MILLIMETRES
UNLESS OTHERWISE SPECIFIED
INTERPRET DIMENSIONS AND TOLERANCES
PER ASME Y14.5M-1994
ALL DIMENSIONS SHOWN APPLY BEFORE
PLATINGS AND COATINGS
TOLERANCES APPLY AS SHOWN BELOW
OTHERWISE, SEE NOTE 5
INCHES
MILLIMETRES
DECIMAL PLACES
± .005
.XXX
± 0.1
± .010
.XX
± 0.3
± .020
.X
± 0.5
ANGULAR DIMENSIONS
FINISH:
COATING:
MODEL REV:
MECH. REF # :
UNITS :
10.40
264.00
Echo
KG]
XX°
XX.X°
SURFACE
ROUGHNESS
± 0.5º
± 0.1º
SHEET
MICROINCH
63
1MICRONOF
1.6
1
DESCRIPTION
SIZE
B
SCALE
NUMBER
1:10
M