Download EtherTRAK I/O Module

Section 1
Overview
General Information
This manual will help you install and maintain the EtherTRAK I/O modules, I/O Expander, and
I/O Concentrator. In summary, wiring for power, communications and I/O is connected to each
module’s base. Then, setup choices are entered using the Sixnet I/O Tool Kit software and the
system will be ready to run. Shown below are some typical system configurations.
Ethernet
Switch
Distribute EtherTRAK I/O modules off of
SIXNET Open RTUs and DCS Controllers
Using EtherTRAK I/O as Expansion I/O for a VersaTRAK RTU
Using an EtherTRAK I/O Concentrator for Larger Stations
EtherTRAK I/O Modules
ET-####-#
EtherTRAK I/O Expander
ET-GT-ST-1 (now obsolete)
EtherTRAK I/O Concentrator
ET-GT-ST-2
Sixnet Products Covered by this Manual
EtherTRAK I/O User Manual
Page 3 of 32
Last Revised: 17-Aug-09
Sixnet Technology Park  331 Ushers Road  Clifton Park, NY 12019  USA  +1-518-877-5173  [email protected]