Download Manual for PC Based Logic Analyzer - 32 Input

GLA User Manual
Delete
Bus/Signal
Select the target signal/bus and click either:
Delete Bus/Signal – the selected single bus or signal. Or
Delete All – all buses and signals.
Restore Default
Restores the default status (all channels are active).
Group/Ungroup
Group signals into bus, or ungroup a bus into signals.
Menu
→
→
Shortcut keys
(group)
(ungroup)
Ctrl+G (group)
Ctrl+U (ungroup)
Method1
Open the Channels setup dialogue window, select the grouped
signals and press Ok. The following example shows that
ChannelD0 ~ D3 are grouped into D0 bus.
Channel Setup dialogue
Method2
44
Result
In the main display, select the range of signals by pressing the Shift
key and clicking the signal names. Then choose Bus/Signal →
Group. A bus named Busx (x stands for 1, 2, 3…) is formed. To
ungroup the bus, choose Ungroup from Bus menu.