Download WIZ1000 User`s Manual

2.2.
2.2.1.
Configuration Tool
Network Configuration
ⓐ
ⓑ
ⓓ
ⓒ
ⓔ
ⓕ
ⓖ
ⓗ
ⓘ
ⓙ
ⓚ
ⓛ
ⓝ
ⓞ
ⓟ
ⓠ
ⓜ
Figure 2. User Interface of Configuration Tool (Configuration via Network)
ⓐ Version : Displays firmware version.
The current version of the firmware of selected WIZ1000 is displayed in this field.
ⓑ Enable Serial Debug Mode : If this mode is checked, you can monitor the status and
socket message of WIZ1000 (listen OK, connect fail etc.) through serial terminal. If Debug
mode is on, debug message can cause abnormal operation of the serial device. Therefore,
just use this mode only for Debug mode.
ⓒ Board List : If you click “Search” button, all the MAC addresses on a same subnet, will be
Copyright © WIZnet All Rights Reserved
WIZ1000 | 11 page