Download DWL-120 User`s Manual

4.5 Checking Connection to the Access Point
What if the wireless network adapter is unable to connect to the
Access Point?
• Check that the ESS ID name is the same on both the wireless
adapter and the Access Point.
• Check that the channel setting for both the wireless adapter and the
•
•
Access Point are the same.
If connected to a wired network, check that the link light on the
Access Point is ON. A Solid link light on the wireless adapter
indicates a connection whereas a blinking link light indicates
activity but a lack of connection.
Make sure that the AP goes through POST (Power On Self Test)
properly and that the unit is not defective.
4.6 Checking TCP/IP Address of the Wireless Adapter
Click on the Start button and click “Run”.
Figure 11 – Start > Run
31