Download User Manual

Transcript
SECTION 3 MENUS
PF
P
Q
S
THD
Dem
1
2
3
T
Hi
Lo
Figure 3-2Minimum Voltage (Phase-Neutral) Display
e.g. : When “V” LED and “Lo” LED are turned on together:
l Line-1 minimum phase-neutral voltage is monitored in the first display.
l Line-2 minimum phase-neutral voltage is monitored in the second display.
l Line-3 minimum phase-neutral voltage is monitored in the third display.
l Minimum average phase-neutral voltage of three phase is monitored in fourth display.
l Minimum network frequency is monitored in fifth display
Minimum, maximum and demand values are stored in permanent memory. Refer to “CLr”
menu to clear these values.
If current/voltage of any of the phases is not connected,
• maximum value of the related parameter will be “0” in maximum page of “L-H Menu”.
• in minimum page of “L-H Menu; “k LED” and “M LED” belonging to current/voltage will
turn on continuously.
Operator will monitor the number “888” in the related 7 segment display.
21