Download GT21 Catalog - Allied Automation, Inc.
Transcript
Graphic Operation Terminal ■Power supply specifications G r a p h i c O p e r a t i o n Te r m i n a l (The general specifications are same as those of the GOT2000 Series. Refer to the GOT2000 Series General Catalog.) Item GOT2000 - Designed to meet your industrial automation needs. Input power supply voltage inch 10.4 inch 12.1 inch 15 ■Performance specifications Item inch Display section 10.4 inch High performance, cost efficient, mid-range model inch 10.4 Unchallenged cost performance 3.8 GT2103-PMBD GT2103-PMBDS GT10-C300R4-25P GT10-C10R4-8P 89.0 (3.51) (W) × 35.6 (1.41) (H) mm (inch) GT10-C30R4-8P 32 levels Serial type Minimum 2 × 2 dots (per a key) GT10-C10R4-8PC Analog resistive film GT10-C30R4-8PC GT10-C200R4-8PC 1 million times or more (Operating force: 0.98 N or less) GT10-C300R4-8PC GT21-C30R4-25P5*1 GT21-C100R4-25P5* RS-232 (rear face) — RS-422/485 1 channel Transmission speed: 115200/57600/38400/ 19200/9600/4800 bps Connector shape: terminal block 5-pin Protective structure 1 channel Transmission speed: 115200/57600/38400/ 19200/9600/4800 bps Connector shape: MINI-DIN6-pin (female) 1 channel Transmission speed: 115200/57600/38400/ 19200/9600/4800 bps Connector shape: terminal block 9-pin 1 channel Data transfer method: 10BASE-T/100BASE-TX — Connector shape: RJ-45 (modular jack) 1 ch Maximum transfer rate: Full-Speed 12 Mbps Connector shape: USB Mini-B 1 channel SDHC card supported (max. 32 GB) Single tone (tone length adjustable) Outside the enclosure: IP67F Inside the enclosure: IP2X GT2103 *1: It is necessary to mount the separately sold SD card unit (GT21-03SDCD). GT2103 ■External dimensions GT2103-PMBD Comparison table for major functions of GT21 GT2103-PMBDS 9.5 (0.37") 19 (0.75") 64 (2.52") Weight: 0.2 kg 9.5 (0.37") 19 (0.75") 64 (2.52") Screen design Figure/object functions Functions performed in background of GOT GT10-C02H-9SC RS-232 cable [Dedicated to the serial type] GT01-C30R2-6P RS-232 connector conversion cable GT10-C02H-6PT9P Superimpose window n n n Dialog window n — n n Key window n n Language switching n n System information n n Comment display Parts display 2 n* n Parts movement n *2 — Historical data list display n *2 — Operator authentication n *2 — Simple alarm display n n Startup logo n n Alarm display (user) n *2 *3 FA transparent n n Level n — Backup/Restore n *1 — Panel meter n n Multi-channel function 2ch — Line graph n n Station No. switching n — Trend graph n n Vertical display n n Bar graph n n Device monitor n n Statistics bar graph n n Statistics pie graph n n Scatter graph n — Historical trend graph n *2 — Logging n *1 — Recipe n *2 Device data transfer *4 n — Trigger action n n n n File output n *1 — Serial printer output n n n — GOT functions Debug functions Between Q/LCPU and GOT*3 Between L6ADP-R2 and GOT*3 Between GOT and personal computer (Can be used for the FA transparent function only. Cannot be used for the screen/OS data transfer.) [Between MINI-DIN 6-pin and D-sub 9-pin] Between PLC and GOT Between multiple connection GOT and GOT Between barcode reader, RFID, serial printer and GOT [Convert D-sub 9-pin to MINI-DIN 6-pin] Between personal computer (screen design software) and GOT [Between USB-A and USB Mini-B] GT09-C30USB-5P GT10-C10EXUSB-5S For extending a USB port of GOT into the control panel. GT01-RS4-M For GOT multi-drop connection SD card unit GT21-03SDCD For SD card mounting L1MEM-2GBSD L1MEM-4GBSD SH-081194ENG 104 (4.09") Safety Warning 104 (4.09") ••To ensure proper use of the products in this document, please be sure to read the instruction manual prior to use. GT21-03SDCD +1 (0.04") 105 (4.14") −0 (0") 3m 10m 20m GT2103-PMBD GT2103-PMBDS 30m 1m 30m 1m 1m 30m 3m NEW 10m NEW 20m NEW 30m NEW 30m NEW 0.2m 3m 0.2m 3m 1m NEW 2GB SD memory card for GOT 4GB SDHC memory card for GOT For 3.8" GOT2000 Series User's Manual (Hardware) Unit: mm (inch) 5 (0.20") 53 (2.09") *1: GT2103-PMBD does not support direct connection to Q00JCPU, Q00CPU, or Q01CPU. *2: Cannot be used for FX1NC, FX2NC, FX3UC-D/DSS, or FX3G. *3: This cable can be used if connected with the RS-232 connector conversion cable GT10-C02H-6PT9P. 15 (0.59") *:32 (1.26) when the separately sold SD card unit (GT21-03SDCD) is attached. Registration ••Ethernet is a registered trademark of Xerox Corporation in the United States. ••MODBUS is a registered trademark of Schneider Electric SA. ••A ll other company names and product names used in this document are respective companies. *1: The separately sold SD card unit (GT21-03SDCD) and SD card are required. *2: The separately sold SD card unit (GT21-03SDCD) and SD card may be required depending on usage. *3: Advanced alarms are not supported. *4: Advanced recipes are not supported. trademarks or registered trademarks of their Small screen, big possibilities. 5-color backlight HEAD OFFICE: TOKYO BLDG., 2-7-3, MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN Refer to each manual for the details of these and other functions. Graphic Operation Terminal 44.5 (1.75") n n Date display, Time display Between PLC and GOT [Convert D-sub 9-pin to loose wire (connector terminal block 9-pin)] USB cable [Option] 0.5m 1m NEW 3m NEW Between FXCPU and GOT Between FXCPU communication expansion board and GOT 10m NEW [Between MINI-DIN 8-pin and loose wire (connector terminal block 5-pin)] 20m NEW Panel-mounted USB Port Extension [Panel cut dimensions] +1 (0.04") 13 (0.51") 13 (0.51") 66 (2.60")−0 (0") or more or more n Text display, Text input 74 (2.92") n 64 (2.52") 113 (4.45") 4 (1.56") n n 21 (0.83") 27 * (1.07") n Overlap window n 9.5 (0.37") Base screen n n Numerical display, Numerical input 65 (2.56") n Lamp 9.5 (0.37") — n 32 (1.26") n n 64 (2.52") 113 (4.45") 74 (2.92") Report function (Serial printer output) Touch switch 21 (0.83") 4 (1.56") — Functions used with peripheral devices 27 * (1.07") n n n Between QnACPU and GOT Between RS-422 conversion cable (FA-CNV□CBL) and GOT Between serial communication module and GOT Between peripheral connection module (AJ65BT-G4-S3) and GOT [Between D-sub 25-pin and loose wire (connector terminal block 5-pin)] Refer to the connection manual for the details of connectable models. 9.5 (0.37") n RFID function n n Screen design Barcode function n Project/screen script GT21-C300R4-8P5 RS-422 connector conversion cable SD card GT21 GT10 65 (2.56") Function name 9.5 (0.37") Category GT21 GT10 Logo text Hard copy GT21-C30R4-8P5 Protective cover for oil GT10-20PCO Figure Time action GT21-C10R4-8P5 GT21-C200R4-8P5 Manual Function name 1 GT21-C300R4-25P5*1 GT21-C100R4-8P5 Serial multi-drop connection unit Weight: 0.2 kg 1 GT21-C200R4-25P5* RS-422 cable [Dedicated to the Ethernet type] 0.2m 3m Between FXCPU and GOT Between FXCPU communication expansion board and GOT 10m [Between MINI-DIN 8-pin and loose wire (connector terminal block 9-pin)] 20m GT10-C100R4-8PC Simultaneous press Simultaneous press prohibited (only 1 point can be pressed) Buzzer output Between FXCPU and GOT Between FXCPU communication expansion board and GOT [Between MINI-DIN 8-pin and loose wire (connector terminal block 9-pin)] GT10-C10R4-8PL* Compatible software package GT Works3 Version 1.112S or later Category GT10-C300R4-8P 2 Key size SD card*1 inch Compact models with basic functions GT10-C200R4-8P 5 colors LED (white, green, pink, orange and red) (Not replaceable) NEW NEW 3m Between FXCPU and GOT Between FXCPU communication expansion board and GOT 10m [Between MINI-DIN 8-pin and loose wire (connector terminal block 9-pin)] 20m GT10-C100R4-8P RS-422 cable [Dedicated to the serial type] Monochrome (black and white) 32 scales Approx. 50000 h (operating ambient temperature: 25°C, display intensity: 50%) USB (Device) Ethernet type Between QnA/ACPU/motion controller CPU (A series)/FXCPU and GOT Between RS-422 conversion cable (FA-CNV□CBL) and GOT Between serial communication module and GOT Between peripheral connection module (AJ65BT-G4-S3) and GOT [Between D-sub 25-pin and loose wire (connector terminal block 9-pin)] GT10-C200R4-25P Backlight life Ethernet FA-CNV2405CBL GT10-C100R4-25P 3.8" User memory Life (number of write 100000 times times) Built-in interface Between QCPU/L02SCPU(-P) and RS-422 cable (GT01-C□R4-25P, GT10-C□R4-25P, GT21-C□R4-25P5) Between L6ADP-R2 and RS-422 cable (GT01-C□R4-25P, GT10-C□R4-25P, GT21-C□R4-25P5) [MINI-DIN6 pin and D-sub 25-pin] FA-CNV2402CBL GT10-C30R4-25P GT2103-PMBDS NEW RS-232, RS-422/485 Surface treatment: clear, Sheet color: transparent, USB environmental protection cover area: closed, Number of sheets included in a set: 5 GT21-03PSCC-UC User memory capacity Memory for storage (ROM): 3 MB inch GT21Model Display color Life GT23Model 8.4 Specifications Displayed number of 16-dot standard font: 20 characters × 8 lines (two-byte characters) characters 12-dot standard font: 26 characters × 10 lines (two-byte characters) Type Touch panel GT2103-PMBD 320 × 128 dots Backlight inch Protective sheet NEW Ethernet, RS-422/485 Surface treatment: anti-glare, Sheet color: transparent, USB environmental protection cover area: closed, Number of sheets included in a set: 5 GT21-03PSGC-UC RS-422 conversion cable Resolution Brightness Adjustment 12.1 1.3 W Contents, Specifications 3.8" TFT Monochrome LCD (black/white) 32 gray scales GT2103-PMBDS Within 5 ms TFT monochrome display Display size Model name GT2103-PMBD Main unit 30 A or less (1 ms, 25°C, at the maximum load) Display device Screen size GT2103-PMBDS 1.9 W or less 2.0 W Permissible instantaneous power failure time GT25Model inch 2.6 W or less Inrush current Advanced model with multi-touch gesture functions 8.4 24V DC (+10%, -15%) Under the maximum load Power consumption At backlight off GT27Model 8.4 GT2103-PMBD ■Product specifications Product name Specifications http://Global.MitsubishiElectric.com High resolution Refer to the GOT2000 Series General Catalog for details. L(NA)08270ENG HIME-L078-A1410(MEE)Printed in Japan New publication, effective Oct. 2014 Specifications subject to change without notice. GT2103 Easily operated, high resolution display in a compact body! High-definition LCD with changeable color backlight GT2103 is equipped with an easy to see, compact high-resolution TFT LCD with 32 gray scales. The intuitively understandable 5-color backlight offers choices of backlight color and backlight blink according to machine operation state. The backlight can also be controlled from the connected PLC (screen color change and backlight ON/OFF/ blink). SD card unit is available! Option SD cards can be used when the optional SD card unit is attached. [Backlight color and screen example] SD card unit Same compact type, but so much clearer! GT21-03SDCD [Pink]: For language switching Separate SD card is required [Orange]: For monitoring [Red]: For warning GT1020 Monochrome (black/white) STN LCD [Green]: For manual operation GT2103 Monochrome TFT LCD with 32 gray scales System configuration of GT21 model [White]: For normal operation Personal computer Enhanced functionality with various connection ports Interface for SD card unit Ethernet type GT2103-PMBD Analog touch panel 74mm Actual size Interface for SD card unit USB 24V DC power USB 24V DC power SD card unit GT21-03SDCD Ethernet USB device RS-232 For Ethernet type only 24 V DC power 24 V DC power GT2103-PMBDS RS-422/485 port Ethernet port GT01-C30R2-6P GT10-C02H-6PT9P PLC, inverter, servo amplifier, etc. PLC*, inverter, servo amplifier, etc. RS-232 port RS-422/485 RS-422/485 For serial type only GT21-C□R4-25P5 GT21-C□R4-8P5 GT2103-PMBD Monochrome TFT LCD GT2103-PMBDS Serial type Ethernet* built in 1 4 times higher resolution*2 320 × 128 dots ● Screen color can be changed according to the machine operation state! ● Backlight color can be controlled from the connected PLC! ● Ethernet* built into a compact body! ● Easy to see, high resolution compact LCD! 1 Actual screen may appear different from this leaflet. * Use GT Works3 Ver. 1.112S or later for creating screens for the GT21 model. Intuitive operations improve efficiency! Easy replacement of GT1020 with GT2103! Note: System application installation required for GT2103 series 5-color backlight GT10-C□R4-25P GT10-C□R4-8P GT10-C10R4-8PL GT10-C□R4-8PC :CPU direct connection with Q00J, Q00, Q01CPU, A Series and FX1/2 Series is not supported. Refer to the connection manual for the details of connectable models. 113mm Only in the Ethernet type model *1: *2: Compared to GT1020 PLC, RFID, barcode reader, etc. For serial type only Ethernet cable (10BASE-T/100BASE-TX) Serial type For Ethernet type only Ethernet type SD card unit GT21-03SDCD PLC, etc. USB device RS-422/485 port IP67F GT2103-PMBDS(Serial type) GT2103-PMBD(Ethernet type) Easy access to the PLC FA transparent function Ethernet for general-purpose connection Remotely access PLC via GOT! Control connected FA devices with GT2103! Connect PC to GOT and set up, program, and modify FA devices via GOT. Control 2 channels of FA devices with just 1 GOT. Data can also be transferred between connected FA devices with settings in GOT software GT Works3. Serial connection is also supported. Factory Option Startup from an SD card Multi-channel function Data transfer Recommended functions using an SD card Reduce setup time for mass produced machines! Backup/restore function Logging function Collect data from multiple FA devices with GT2103. Store required data in SD card and boot from Uniformly manage data of FA devices connected to SD card to reduce setup time and maintenance. GOT. Data can be collected at any arbitrary timing, Screen data can also be transferred from SD useful for analysis and feedback. card to GOT. Office The separately sold SD card unit (GT21-03SDCD) is required. Factory Back up important programs with GT2103! Back up PLC program and parameters to SD card. In case of unexpected trouble, backed up programs can be instantly restored to PLC. Factory Office GT2103 Personal computer GT2103 USB GT2103 GT2103 PLC Ethernet connection Serial connection GT2103 HUB FX3U-ENET-ADP GT2103 GT2103 GT2103 GT2103 GT2103 GT2103 PLC Ethernet FX3UC-32MT QCPU GT2103 PLC GT2103 GT2103 PLC program transfer/monitoring/testing GT2103 GT2103 GT2103 GT2103 Data acquisition GT2103 GT2103 HUB MODBUS® equipment, etc. Restore GT2103 GT2103 GT2103 Backup SD card SD card