Download Div 10 - Public Surplus

HNTB Corporation
Houston, Texas
Roadway Signage Upgrades at Bush IA H
PN552/CIP No : A-028 5
4.
C.
Samples for verification of color, pattern, and texture selected, and complianc e
with requirements indicated :
1.
1 .04
Provide detailed design for concrete foundations for new and/or relocate d
signs .
Submit to Designer for approval the following samples :
a . Four 12-inch square samples of each sign face (Terminal icons an d
black) material with proposed color of background coating applied .
Where finishes involve normal color and texture variations includ e
sample sets showing the full range of variations expected .
PROJECT CONDITIONS
A . Field Measurements : Take field measurements prior to preparation of sho p
drawings and fabrication to ensure proper fitting . Show recorded measurement s
on final shop drawings . Coordinate fabrication schedule with constructio n
progress to avoid delay.
PART 2 - PRODUCT S
2.01
MATERIALS
A.
Acceptable aluminum alloys for this Item are given in AASHTO Standar d
Specifications for Structural Supports for Highway Signs, Luminaries, and Traffi c
Signals.
B.
Sign Panels : Use existing panels . Existing borders do not
1.
C.
Sign panel connections to be as shown on Plans and as approved b y
Designer.
Copy:
1.
Each letter and symbol shall be applied to a badge supplied with mountin g
holes and shall be secured to the sign surface with approved rivets . The use
of tape, glue or other substances to secure to the sign face during fabricatio n
or in its final form, other than approved rivets, will not be allowed .
2.
Panels shall be attached flush against sign faces after background materia l
has been applied.
3.
Spacing of all legends and borders shall be as specified with an allowabl e
SIGNS
10425-2
3-8-99