Download DeskView User Manual 1

Chapter 5: DeskView Settings
Altiris Console’s DeskView Policy Settings
Thin Client Settings Policy Settings
Altiris Console > Configuration tab > Configuration > Solution Settings > Platform Administration >
DeskView > DeskView Policies > Configure Thin Client Settings
Enable
When selected and the Apply button is clicked, enables the policy with the set parameters
New Unconfigured System Only
When selected, the policy applies to the newly discovered systems, which have not been configured
previously.
System Configured to use Notification Server
When selected, the policy applies to the systems configured to use the specified Notification Server.
Note: Use the text box to specify the server address.
Server Name
Sets the new Notification Server name to be used by thin client.
Server Web
Sets the new Notification Server Web address to be used by thin client.
TCP/IP Port
Used to set the new TCP/IP multicast port.
Note: Default multicast port setting – 52029.
TCP/IP Multicast Address
Used to set the new TCP/IP multicast address.
Note: Default multicast address setting – 224.0.255.136.
TCP/IP Address
Used to set the server TCP/IP address.
Enable Schedule
When selected, schedules the policy to be run at the interval in the drop-down list.
Thin Client Storage Policy Settings
Altiris Console > Configuration tab > Configuration > Solution Settings > Platform Administration >
DeskView > DeskView Policies > Configure Thin Client Storage
New path
Used to specify the new storage path setting.
Note: The current path setting is displayed above the New path text box.
New limit
Used to specify the new storage limit setting.
Notes:
•
The current limit setting is displayed above the New limit text box.
DeskView User Manual
51