Download Reference Manual

WSPG Documentation
ERROR 23: Manhole number of channel [x] must be between 1 and 10.
ERROR 24: Invalid value for Manning's n for channel [x].
ERROR 25: Bridge element [x] cannot have a pipe as its downstream or upstream element. Either replace bridge
element or channel definition.
ERROR 26: Channel types at bridge element [x] do not change.
ERROR 27: Channel cross sections of bridge elements [x] downstream and upstream channel do not match.
ERROR 28: Channel types at wall element [x] do not change.
ERROR 29: Upstream channel of wall entrance [x] contains piers. Use a bridge exit instead?
ERROR 30: Downstream channel of wall exit [x] contains piers. Use a bridge entrance instead?
ERROR 31: Junction [x] has a channel of irregular type.
ERROR 32: Point set for channel [x] exceeds maximum allowed number of 99.
ERROR 33: One or more errors were detected while reading the data file. Please correct the above errors first.
ERROR 34: Too many characters in input line.
ERROR 35: Input data incomplete. Too few items.
ERROR 36: Branch [x] is defined twice.
ERROR 37: Invalid keyword [x] in the data file.
ERROR 38: Duplicate ID name [x].
ERROR 39: Undefined object [x].
ERROR 40: Invalid number [x].
ERROR 41: Channel height of channel [x] is not positive.
ERROR 42: Channel width of channel [x] is not positive.
ERROR 43: Total pier width for channel [x] exceeds the channel width.
ERROR 44: Pier width for channel [x] must be a positive number.
ERROR 45: Irregular point set of channel [x] has less than 3 points.
ERROR 46: Irregular point set of channel [x] does not fulfill monotonous sequence requirements.
50