Download User Manual - Z Microsystems

Starting Point
Congratulations on selecting a rugged
field-ready Orion 18/28V
SHIPMENT CONTENTS
USER MANU
AL
MANUAL
The Orion shipping box contains the
following:
The User Manual is also available on
the Z Microsystems website
(www.zmicro.com).
• The Orion FPD
We recommend you read this manual
as follows:
• Video Signal Cable
• Power Connector
Carefully follow the instructions in the
Installation chapter for hookup and
initial control settings.
• Protective Lens (optional)
• User Manual
Refer to the Operation chapter for a
complete description of all the user
controls, and the Maintenance chapter
for care and correcting any unforeseen
problems with the system.
• 4 x 10-32 x 1.00L Screws
• 4 x #10 Flat Washers
• 4 x 10-32 Nut Plates
Remember to save your original
shipping container and packing
material to transport or ship the
Orion.
SYSTEM REQUIREMENTS
The Orion works with any computer
system that provides industry standard
screen formats from 640 x 480 to
1280 x 1024, with up to 85 Hz
vertical sync. Required input power is
18-36 Volts DC with a power consumption of 110 Watts.
4
Doc# 27-0012UM Issued 03/02 Rev 1.0 03/01/02