Download ERSA IRSoft

ERSA IRSoft 2.0
Operating instructions / user manual
4.4. The view of IRSoft
The basic view of IRSoft shows temperature profiles and process parameters, recorded
from a connected IR 550 A Rework system.
The user can select scale, channels and colours. How to do this will be explained in the
next sections.
4.4.1.
Depict able channels
In this section information about selecting and depicting temperature channels will be
given.
The IR 550 A includes two different temperature sensors. With both of them temperature
profiles can be recorded. One is the integrated infrared sensor the other one is an
optional available thermocouple.
The display of the IR 550 A always shows the reading of the activated sensor. At the
same time this temperature reading is used to control the soldering process. Both
sensors are detecting the surface temperature of the component or the PCB. To transfer
this information to the temperature at the solder joint, the calibration function has been
implemented to the IR 550 A. When the user detects the melting of the used solder he
can calibrate the sensor reading to a specific liquid temperature.
The IR 550 A always displays the calibrated reading of the selected sensor. Using
IRSoft more possibilities open up.
All temperature sensors are recorded permanently. The operator can choose which
channels should be displayed or printed.
Settings of main view
IRSoft User manual
The elements of IRSoft • 12