Download Race Studio 2 - Precision AutoResearch

Transcript
% on reference
The best lap (the one with the lowest lap time) is considered the Reference Lap.
It is possible to change the reference lap, deselecting it and selecting another lap.
Time from the
beginning
Time from the beginning of the test. In minutes: seconds: milliseconds.
Lap cause
A lap may be: Lap marker, First lap, Vehicle stop, Computed merging two
laps, Computed splitting a lap or Calculated lap. This last possibility, very
rare, means that there is an incompatibility between the value of the lap and the
number of samples recorded: the lap time is so recalculated, considering some
check points that the logger puts inside the data.
The Computed splitting a lap/merging two laps lap causes are shown when the
Merge to next lap/Insert lap options are used.
The old files, where the lap cause was not specified, show simply Generic lap.
Run
In a test you may have one or more Runs. Whenever the car stops for more than
a few seconds, the Run counter is incremented. In this way it is possible to divide
the data in accordance with the different test runs.
Split #
These cells show the split times sampled by your data logger. AIM gauges, such
as MyChron 3 Basic/Plus/Gold, are able to record up to 5 split times.
As shown in Figure 3.8, the laps are listed from the 1st to the last one.
• If you click on the “Lap number” box, the laps will be displayed from the last to the 1st one.
• If you click on the “Lap time” box, the laps will be listed from the fastest to the lowest. If you
click again on the “Lap time” box, the laps will be shown in the opposite order.
3.7 – How to have more information about a test
If you wish to have more information about a test, please select the desired test among the loaded ones
and click the “Advanced info” (1) button, as shown in Figure 3.9.
(1)
Fig. 3.9– Test database and Lap manager window: layers and buttons.
It will appear the Advanced info window, as shown in Figure 3.10.
Fig. 3.10– Advanced info window.
Race Studio Analysis: user’s manual
17