1
Download USER`S MANUAL
Transcript
2. Remove the indicated screw and the shipping bracket from the Base (1). Discard the screw and the shipping bracket. 2 Next, tighten the Base Foot (26) into the Base (1). 1 Shipping Bracket 26 Screw 3. Attach the Rear Stabilizer (7) to the Frame (2) with two M10 x 127mm Screws (83). 3 83 Next, hold the handle on the Frame (2), press the Latch (68), and lower the Frame until the Rear Stabilizer (7) rests on the floor. 7 Handle 2 68 7
