Download USER`S MANUAL

Transcript
6. Identify the Left Upright Cover (17), which is
marked with a “Left” sticker, and hold it against
the left side of the Upright (3).
6
Attach the Left Upright Cover (17) with two M4 x
16mm Round Head Screws (101).
3
Attach the Right Upright Cover (39) in the
same way.
39
101
17
101
7. Identify the Right and Left Handlebars (60, 119),
which are marked with “Right” and “Left” stickers, and orient them as shown.
7
116
3
Tip: Avoid pinching the Pulse Wires (118).
Attach the Left and Right Handlebars (60, 119) to
the Upright (3) with two M8 x 80mm Bolts (116)
and two M8 Jam Nuts (79).
60
116
119
118
79
118
9
Avoid pinching
the wires