Download Linux Journal | October 2014 | Issue 246

Transcript
FEATURE Accessing the I/O Ports of the BeagleBone Black with Python
Figure 3. The Board “bbbO2” in situ with three serial ports and the serial debug
port, a temperature sensor on AIN0, a water detector on GPIO_48, a PPS input on
GPIO_49 and a POWER_RESET button.
for the other UARTs available on
the board.
The BBB comes with six UARTs, but
three of them can’t be addressed by
our applications:
Q UART0 is the serial debug on J1.
Q UART3 lacks an RX line.
Q UART5 can’t be used altogether
with the HDMI output.
So UART1, UART2 and UART4
are the ones available, and they
are addressed, respectively, as
/dev/ttyO1, /dev/ttyO2 and /dev/ttyO4.
Note that only UART1 and UART4
have CTS and RTS pins.
90 / OCTOBER 2014 / WWW.LINUXJOURNAL.COM
LJ246-Oct2014.indd 90
9/17/14 4:50 PM