Download User Manual
Transcript
VXCO Lighting Systems DMXCreator Manual Total Amount of Scenes to be uploaded Cancel upload Confirm programming Should you receive the message “Programming impossible”, you have created more than 8000 (or 2000 on elder Interfaces) Scenes. The DMXCreator512MK2 interface has a 32 Mbit Flash-Memory allowing for a maximum capacity of 8000 Scenes per upload (2000 Scenes memory on elder interfaces). Note: If your Show uses Sequences with slow faded Scenes, the amount of programmed Scenes may exceed the actual available memory space into the interface box. The reason for this is that the microcontroller into the interface merely emulates the Fade function by generating intermediate Scenes. As a result, long Fade times result in more Scenes. If you don’t use the Fade feature at all, you will have the full amount of memory Scenes available. -Stand Alone Mode without PC-Keyboard: Once uploaded to the interface, the Show will run as soon as the interface is connected to a power supply. The Show begins with the first programmed Sequence. If the Sequences play mode is set to loop, it will repeat itself endlessly else it will stop after running the Sequence once. -Stand Alone Mode using a PC-Keyboard: The DMXCreator512MK2 has a PS-2 port for connecting a regular PC-keyboard. Within the Stand Alone Mode, the keyboard can be used to select Sequences, change speed rates (+/-), blackout and starting/stopping Sequences. Here is the layout for a keyboard: Manual V1.6 51