Download Apollo user manual
Transcript
11.2 Joystick Mounting Hardware – Fixed Bracket WARNING: After any adjustments, repair or service and before use, make sure that all attaching hardware is tightened securely - otherwise injury or damage may result. FIXED JOYSTICK MOUNTING ARM INSTALLING / REMOVAL: This type of mounting can move the joystick position either away from, or towards the armpad. This can be set according to comfort and arm length as follows. There is no height adjustment other than to vary the armrest height. L 1. Unscrew the small handwheel (L) located on the underside of the armrest. 2. Install / remove the joystick mounting arm. Tighten small handwheel (L). CAUTION: Do not use your powered wheelchair if the joystick boot shows any visible signs of damage. Please refer to your INVACARE dealer regarding repairs. ADJUSTMENT: 1. Unscrew the small handwheel (L) located on the underside of the armrest. 2. Slide the Joystick to the desired position. Tighten small handwheel. 61