Download User Manual - Neteon Technologies

Web-based management
6.8 Services menu
U DynDNS Hostname
The hostname selected at DynDNS service for this RR-EPL- provided
that you use a DynDNS service and have made the proper settings
above.
6.8.4 Services:DHCP Intern (trusted port)
DHCP Internal has three operating modes:
D Deactivated:
DHCP is switched off at this port.
D Server:
The DHCP server (Dynamic Host Configuration Protocol) of the RR-EPL
assigns the clients connected to the RR-EPL automatically
D the IP addressed defined in the DHCP range and subnet masks or
D the statically entered IP addresses.
Note: It is possible to configure the RR-EPL as a DHCP client in router
mode (see “External interface” on page 76).
Option:
If the DHCP server is activated, you can enter the network parameters to
be used by the clients during dynamic assignment:
Parameter
Enable dynamic IP
address pool
DHCP lease time
DHCPrange start
DHCPrange end:
Local netmask:
Broadcast address
Meaning
If no static assignment applies, then the RR-EPL assigns an IP
address from the dynamic address pool.
Time in seconds after which the assigned IP address becomes
invalid and the client makes a new DHCP query.
Beginning and end of the address range from which the DHCP
server of the RR-EPL is to assign IP addresses to the locally
connected clients.
The default setting is: 255.255.255.0
Specifies the broadcast address of the client.
Table 11: Client network parameters
RR-EPL
Release 1.0 01/06
123