Transcript
MC600 ULTRA-MINIATURE INDOOR DAY/NIGHTCAMERA WITH 3.6mm LENS SUPREME RESOLUTION PRODUCT FEATURES COLOR MINIATURE CAMERA •600 Lines of Resolution MANUAL •Digital Wide Dynamic Range •OSD Control of All Major Functions ◐ PRECAUTION •AutouseElectronic Shutter 1. Recommend of a regulated 12V DC 300mA power supply unit with the•camera for the best picture and safe operation of the unit. Ultra-Miniature Housing 2. Recommend use of the camera with the monitor which has the standard video input impedance level of 75Ω . If your monitor is set to high impedance mode, please switch the monitor into standard impedance position. Model 3. Do not attemptNo. to disassemble the MC600 camera. There are no user serviceable parts inside. Refer service 1/3" to qualified service Imaging Device SONY Super HADpersonnel. II CCD 4. Never Resolution face the camera toward the sun. 600ItTVmay Linescause a smear on the picture when the camera is directly faced to the sun, spotlights TV System NTSC or light reflecting objects. Effective Pixels 768 (H) X 494 (V) 5. Do not expose the camera to rain or moisture, and do not try to Lensthe camera in wet place. Fixed Focal 3.6mm operate Moisture can damage the Sync System Internal shock. camera and create the damage of electric 6. Do notScanning install the camera in the place System 2:1 where Interlaceis close flammable materials, metal goods or liquid. They can damage camera.BNC Video Output 1.0Vp-p 75 OHMthe Composite 7. Do not install the camera in the place which has the high voltage, Minimum Illimination 0.1 Lux high frequency and high magnetism band. They can damage the S/N Ratio 48dB (AGC Off ) camera. ◐ DIMENSION 0.45 Electronic Shutter Speed - Manual (1/60 ~ 1/100,000 sec.) If the product is to be put outAuto of operation definitively, for a disposal OSDtake it to a local recycling plant Yes Built-in on Back which of Camera is not harmful to the environment. BLC (Backlight Compensation) DWDR / BLC / HLC / OFF AGC (Auto Gain Control) BRIGHT E.SHUTTER 31.8 HLC D-WDR Yes Power Requirement Regulated 12 volts DC +/- 10% Power Consumption * ①ENTER : 100mA 2 ㆍPush the lever : Used to access the Operating Temperature 14° ~ 122°F menu and confirm selection. Weight 4 5 ㆍPush1.8 the oz lever for one second : Used to return to Case previous menu from the 1 Housing Metal (Black) 3 motion detection Dimensions (H x W x D) 1.25” x 1.25”setting x 1.19”section or privacy mask setting section. All specifications subject to change without notice for quality improvement ②UP, ③DOWN : Used to move the cursor to up or down. ④LEFT, ⑤RIGHT : Used to move the cursor to left or right and change the value. PACKAGE CONTENTS (1) Camera (1) Mounting Screw (1) Camera Mount (1) User Manual 29.6 29.6 16.4 16. 4 15.8 Board lens type Side-View 31.8 16.4 19 Flat pinhole lens type Conical pinhole lens type Front-View CAMERA CABLE CONNECTION 1 Type 2 Insert power lead intoType power connector (confirm SONYobserve SUPER HAD CCDⅡ proper voltage1/3"and polarity).1/3" SHARP HS CCDⅡ Model No. Image Sensor Effective Pixel 768(H) X 494(V) PIXEL(NTSC), 752(H) X 582(V) PIXEL(PAL) Insert video lead into BNC connector (push, then 6.35㎛(H) X 7.4㎛(V)(NTSC) 6.4㎛(H) X 7.5㎛(V)(NTSC) 6.5㎛(H) X 6.25㎛(V)(PAL) twist to lock connector in place). 6.53㎛(H) X 6.39㎛(V)(PAL) Cell Size Resolution 600 TV-Line TV Type NTSC / PAL Sync. Type Internal Scanning System Video Output 2:1 Interlace 1.0 Vp-p(Sync. Negative) Termination 75Ω±10% γ= 0.45(Adjustable) Gamma Characteristic 0.1 Lux(F/1.2) Yes(Multi-language) Motion Detection ON / OFF Selectable(64 Zone) White Balace ATW / AWC / MANUAL Privacy Zone ON / OFF Selectable(4 Zone) OSD CONTROL Day & Night S/N Ratio Mirror Electronic D&N(AUTO, COLOR, B/W) 48dB over(AGC OFF) ONback / OFF of the camera to Press the Joystick button on the DWDR / BLC / HLC / OFF access the OSD menu. Backlight Reverse Polarity Protection Gain Control Shutter Test Illuminance Area Power Supply Current Consumption Lens YESPush and Hold Automatic(Adjustable) 1/60~1/100,000sec(NTSC), 1/50~1/100,000sec(PAL) Average test illuminance by front view Regulated 12V DC ±10% Max. 100mA Fixed focal lens Push and hold Joystick button to50℃ exit Motion -10 ∼ -20 ∼ 60℃ Detection and Privacy Mask setting section. Operation Temp. VIDEO Preservation Temp. 12V DC - + ※All specification is subject to change without notice to improve the quality. Dimension Weight 31.8mm(W) X 31.8mm(H) Approx. 50g Sub menu Contents 0 ~ 100 Adjust the brightness AUTO Shutter speed auto adjustable 1/60(1/50) ~ 1/100,000 Select shutter speed manually Determines that use the AGC function or not OFF, LOW, and AGC level selectable(You can not use the MIDDLE, HIGH Auto D&N change mode when AGC is off) OFF, LOW, MIDDLE, HIGH Digital Wide Dynamic Range OFF, ON BLC function High Light Mask function. OFF, ON, In case of AUTO mode, the function will off in AUTO daytime and on at night According to the threshold value, the camera will recognize as High light or not. Color temperature 2500 ~ 9500° K Adjust the Red or Blue values to shift the color MANUAL 2. WHITE of the object AWB MODE BALANCE Move the camera lens toward to white paper then press the set button to find the optimal AWC↓ white balance for current environment AUTO Auto day&night switching mode Fixed at color D&N MODE COLOR Fixed at B/W B&W Determines whether to transmit the burst signal OFF, ON 3. DAY&NIGHT BURST or not in B/W mode COLOR → B&W 85 ~ 170 You can select brightness of illumination about B&W → COLOR 50 ~ 135 changing the day ↔ night mode You can select the duration time about chaining DELAY TIME 3 ~ 15 the day ↔ night mode Set a horizontal image inversion MIRROR OFF, ON Sharpness adjustable SHARPNESS 0 ~ 50 0.45, 0.6, 1, USER Gamma adjustable GAMMA Determines whether to use the brightness comLSC OFF, ON 4. IMAGE pensation of four lens' corners(LSC) or not ADJUST The LSC level selectable LSC LEVEL 0 ~ 50 Adjust Red tone of the image 0 ~ 200 R-Y GAIN 0 ~ 200 Adjust Blue tone of the image B-Y GAIN Test signal. Press the set button, color bar appeared on the screen PATTERN GENERATOR and press any key to return to menu Determines whether to use the motion detection OFF, ON MOTION function or not No display on the screen though movement NONE is detected The words 'MOTION' appear on the screen MESSAGE DISPLAY when movement is detected Motion detection area appear on the screen MASK when movement is detected 5. MOTION Press the set button to move into the motion detection area SET section to set the 64 areas. Press the set button for a few second WINDOW to move out ALL SET↓ Press the set button to select all area ALLCLEAR↓ Press the set button to remove all area Motion detection sensitivity SENSITIVITY 0 ~ 255 Set the duration of outside alarm. If the way of display is message, it means display time of HOLD TIME 1 ~ 15 message Display each privacy mask or not. Press the set button to move into the privacy mask setting section, whenever you press the set button, the mask color is changed. When the MASK OFF, ON 6. PRIVACY mask color is red you can adjust the size by 1, 2, 3, 4 up, down, left and right button. When the MASK mask color is blue you can set the position of mask by up, down, left and right button. Press the set button for a few second to escape MASK COLOR BLACK, GRAY,… Select mask color Select language LANGUAGE ENGLISH,… NAME DISPLAY OFF, ON Display the camera ID on the screen Press the set button to move into the name setting section. You can choose the letter by using up and down button and move EDIT 7. SPECIAL next letter by using left and right button. Press the set button for a few second to move out Press the set button to move into the position setting section. You can move the camera ID to your wanted position by using POSITION up, down, left and right button To reset your camera to factory default condition 8. FACTORY Notice : Language is not changed SET Save the value and then restart 9. EXIT HLC THR 16.4 ◐ SPECIFICATION OSD Day/Night Type (Auto, Color, B/W) ◐ CABLE ARRAY & HOW TO USEElectronic THE JOG LEVER AGC 1. EXPOSURE DWDR BLC Min. Illumination Automatic / Adjustable OSD MENU SETUP ㆍOSD menu structure Function setting menu Select menu SPECIFICATIONS Gamma Characterisic ◐ FUNCTION SETTING CAMERA DIMENSIONS 0 ~ 100 ATW ♦ 3625 Cincinnati Avenue, Rocklin, CA 95765 ♦ 888-874-3336 ♦ www.northernvideo.com 3B15109B Rev. 030113
