1
Download User`s Guide
Transcript
4 Multimeter Setup Options Setup Menu Items Changing the thermocouple type (U1272A only) This setting is used with temperature measurements (see page 88). Select a thermocouple type that matches the thermocouple sensor you are using for temperature measurements. Parameter Range Default setting CoUPLE tYPE K or tYPE J tYPE K To change the thermocouple type: 1 Press for more than 1 second to enter the multimeter’s setup menu. Setup MaxMin Peak 2 Press or secondary display. Range Auto until is shown on the Figure 4-12 CoUPLE display 3 Press Dual Exit or Setup to change the thermocouple type. Hz % ms Log 4 Press to save your changes or press discard your changes. Shift Esc View to 5 Press and hold until the multimeter restarts to return to normal operation. Setup 142 U1271A/U1272A User’s Guide
