Download User`s Guide

Multimeter Features
Recording Measurement Data (Data Logging)
3
Figure 3-7 Interval log display
Hz % ms
Log
2 Press
log mode.
for more than 1 second to exit the interval
The maximum number of readings that can be stored for the
interval log is 10000 entries for the U1272A and 200 entries
for the U1271A. When all entries are occupied,
will
be shown when
is pressed.
Hz % ms
Log
The interval and event log share the same memory buffer
(total combined: 10000 entries for U1272A and 200 entries
for U1271A). Increased usage of the interval log entries will
lead to the decrease of the maximum entries for the event
log, and vice versa.
See the “Reviewing Previously Recorded Data (View)” section
later in this manual to review or erase the recorded entries.
NOTE
U1271A/U1272A User’s Guide
When the interval log recording session is running, all other keypad
operations are disabled; except for
, which, when pressed for more
than 1 second, will stop and exit the recording session. Furthermore, APO
(auto power-off) is disabled during the recording session.
Hz % ms
Log
119