Download "user manual"

Transcript
Multi Axis Controller
GENERAL SAFETY NOTES
APPLYING POWER
Verify that the product is set to match the line voltage
and the correct fuse is installed in Fuse 1.
SAFETY GROUND
An earth ground connection should be provided from the
main power source to the rear panel power cord and
ground terminal.
RESUSCITATION
Personnel working with or near hazardous chemical or
voltages should be familiar with modern methods of
resuscitation.
USE SAFETY
When cleaners are being applied, approved explosion-
APPROVED EQUIPMENT
proof lights, blowers, and other equipment shall be
used. Ensure that firefighting equipment is readily
available and in working order. Keep cleaners in special
polyethylene bottles or in safety cans and in minimum
quantities. Discard soiled cloths into safety cans.
MOVING EQUIPMENT
This product controls moving equipment and
instrumentation including turntables, antenna
positioners, aircraft, test models, sharp & heavy objects.
Personnel must take great care when operating this
product and the controlled equipment.
Doc. No. MAL-4806-3C.doc
-7-
Rev: B
Information contained herein is the sole property of ORBIT/FR and is not for publication, duplication, and it may not be passed to any other
party without written authorization from
ORBIT/FR.