Download T800 Visual Supervisor Handbook Issue 8 - E
Transcript
VISUAL SUPERVISOR HANDBOOK 3.5.4 Alarm history archive The ARCHIVE facility permits the current alarm history to be saved in ASCII format to floppy disk. Note: In order to avoid the possibility of loss of logging data it is strongly recommended that archiving is performed with normal logging turned off. Alarms ACK ACK ALL HISTORY SUMMARY LOG NOTE 1. In the Alarms menu, press ARCHIVE The Alarm Archive window appears. ARCHIVE MESSAGES The File Name field shows the default of YYMMDDHH. ALH, which the instrument supplies automatically. To change this name, press the field to get the keyboard display, and enter a new name. The file extension is always .ALH, (not editable). Alarm Archive Archive to disk the alarm history File Name: 99072009.ALH Date Format: Date Time 2. To abandon the name before completion, press CANCEL. OK 3. When the correct name has been entered, press OK. CANCEL If required the ‘Date Format’ field can be edited in a similar fashion. The format options (Date Time, Spreadsheet and Integer) are described in sections 4.2.1 and 4.5.4. 3.5.5 Alarm summary page This provides an alternative way of displaying only those alarms which are currently active (acknowledged or not) and previously active alarms which are now cleared but which have not been acknowledged. To display the alarm summary page, either press the SUMMARY key in the Alarm menu, or, for SVGA units only, the cycle screens key can be used to toggle between Alarm History and Alarm Summary display pages. Operating the Option key calls an option bar like that described in section 3.5.1 for the alarm history display, except that it includes only ACK, ALL, AREA, BLOCK and GROUP keys. Alarms ACK ACK ALL HISTORY SUMMARY LOG NOTE ARCHIVE MESSAGES 13:54:05 T800 2500/7 Alarm Summary TYPE BadBat Comms ACTIVE 14/02/99 08:13:21 14/02/99 08:13:21 14/02/00 CLEAR Figure 3.5.5 Alarm summary access Note: Initially, the display shows only the highest priority alarm in each block. Operation of the down arrow key at the bottom of the screen causes the display to change such that it shows all alarms. A further operation of the keys returns to the single alarm/block display, and so on. HA261376 Issue 8 Jul 04 Chapter 3 Page 3 - 19