Download "user manual"

Default Tx Key: There are four keys 1~4 that you can select at will. All
computers, access points, and wireless adapters must use the same key
when making a connection.
Encryption Key 1~4: Enter the password in the encryption key field
that the encryption key number must match the selected Tx key.
WPA (Wi-Fi Protected Access): It is designed to improve WEP
security and provides stronger data protection and network access
control than WEP. Most wireless networks should use either WEP or
WPA security.
WPA-PSK/ WPA2-PSK: WPA-PSK is easier to configure than WEP.
All computers, access points, and wireless adapters must use the same
type of security when making a connection. WPA-PSK mode (PreShared Key or WPA-Personal). In this mode, a pre-shared key or
passphrase is used for authentication. The enhanced WPA2 uses
Advanced Encryption Standard (AES) instead of Temporal Key
Integrity Protocol (TKIP) to provide stronger encryption mechanism.
Pre-Shared Key Format: There are two formats for choice to set the
Pre-shared key select the format form the pull-down list, Passphrase
and Hex (64 characters). If Hex is selected, users will have to enter a
64 characters string. For easier configuration, the Passphrase (at least 8
than 63 characters) format is recommended.
Pre-Shared Key: This is the shared secret password between
computers, access points, and wireless adapters. Only for WPA-PSK
and WPA2-PSK authentication modes, this field must be filled with
character longer than 8 and less than 63 characters, in which the 802.1x
Authentication will be activated. Make sure the same password is used
on all computers, access points, and wireless adapters.
Apply Changes: Click this button to save and apply the current settings.
Reset: Click to clear and reset the current settings.
Advanced
Settings
Click Setup button to enter the Wireless Advanced Settings page.
40