Download WCS-V8000 Programmer Help File

Importing a file
17.5
171
Import - Step 4
Import Step 4 of 4: Limit the channels that are imported by the Programmer
Again, you can make adjustments to the data to be imported without having to edit the
original file. Select all or any part of the list by checking the box at the left of the screen.
Since the data can be imported into an existing file, use the boxes at the top of the
screen to place the data in the file where you want it to appear.
Starting radio memory - Insert the channels into the file somewhere other
than at the beginning (i.e., At the end of a list that has the last channel of
21. Enter 22 in this box to begin with the next memory channel of that file).
Overwrite existing channels - Tells the process to replace data it finds in the
existing file or to skip that data and write in the next available channel. For
example:
Unchecked - If you import into a file with memories in channel numbers 110, 12, 15 and 16 the process would write the imported channels in order to
11, 13, 14, then 17 on to the end of the imported list.
Checked - If you import to a file with memories in channel numbers 1-10,
12, 15 and 16 the process would write the imported channels in order
beginning at channel 1and continue in order to the end of the imported list.
The existing channel data of the file would be lost in the process as it is
replaced with that of the imported file.
Finish - Click to compete the process. The resulting file in this example
would look like this:
© 2013 RT Systems, Inc.