Download NAT Traversal in Fanvil D100

Fanvil D100™ User Manual
Figure ‎6: Upgrade Window
24.
In the URL text-box, type the Fanvil D100’s upgrade server’s address:
update.D100mcu.com. If DNS has not been set (Network Settings section Configuring
Network Settings, use its IP address: 23.23.229.203.
25.
In Version text-box, enter the version number to be downloaded (will be supplied by
FANVIL support, upon the release of a GA version).
26.
After the upgrade is completed, the system must reboot. For an automatic reboot, select
Reboot. Otherwise, after the upgrade’s completion, the system shall reboot manually.
27.
Click Download.
After the software download is completed, the Start the Upgrade button is displayed:
Figure ‎6: Starting the Upgrade Process
28.
Click Start the Upgrade. The upgrade starts.