Download Tap

Transcript
Battery
Method
Data
transfer
mode
Charging
mode
Description
You can transfer files from your computer to the
Reader while charging. The Reader cannot be
operated.
After the USB storage screen is displayed on the
Reader, it is detected on your computer, and the
“READER” and “SETTING” drives appear on your
computer.
When the icon* turns into the
icon,
charging is complete.
When charging is complete, disconnect the USB
cable from the Reader and your computer.
After a short time, the [Home] screen will
appear.
*
This icon is only displayed when the
Reader is in data transfer mode.
Press the (Home) button. The [Home] screen
appears. When the icon turns into the
icon, charging is complete.
In this mode, the Reader is not detected by your
computer. When charging is complete,
disconnect the USB cable from the Reader and
your computer.
Note
Your computer must be turned on to charge the Reader.
The Reader will not be charged if your computer enters
Table of Contents
34