Download ASIN SALT

Asin Salt is a microprocessor-controlled power supply and electrolytic cell for electrolysis of slightly salty water for
the purpose of its disinfection. Slightly salty water is electrolyzed with an up-to-date electrolytic system to produce
chlorine, which ensures complete water disinfection, destroying bacteria, viruses and algae. During the electrolysis
3
the salt (NaCl) contained in water (4 - 8 kg m of water) is decomposed into chlorine, which remains in water in the
form of hypochlorous acid. Asin Salt is equipped with:
 Output indication in the range of 10 – 100%
 Indication of of the electrolyzer overloading
 Water flow monitoring, which ensures disconnection of the electrolyzer if water stops flowing
through the electrode
 Safety earthing of the whole system
 A self-cleaning system of the electrodes.
The system can be operated in two ways:


In cooperation with the filtration plant when it is switched on together with the circulation pump. In this case
ASIN Salt produces chlorine during the whole filtration period. Ba measuring the chlorine concentration the
length of the filtration period must be adjusted so that the free chlorine concentration is at least 0.2 mg/l
and does not exceed 1 mg/l.
In connection with the regulator ASIN Aqua S the amount of chlorine together with the pH level is
automatically controlled.
Technical specification
Power supply
230 V AC 50 Hz
Power demand
190 VA
Fuse
T1A
Chlorination output
5,4 – 13,5 g Cl / hour
Electrolysis output
Max 17 A 6 V DC
Output voltage
6 V DC
Overvoltage category
II
Protection
IP 20
5 – 40°C
Climatic resistance
Size (W x H x D)
250 x 160 x 130 mm
Weight
5500 g
Location
wall
Installation
ASIN Salt is installed on a wall in the distance of max. 1.5 m from the electrolyzer, which is installed in the
circulation pipeline. With the electrolyzer ASIN Salt is interconnected with a cable that is a fix part of the
electrolyzer. The connection of terminals is shown in the fig. 1.
ASIN Salt is a powerful source that is cooled with an internal fan. The cooling air inlet from the bottom must
not be covered. Never install ASIN Salt near sources of heat or in the direct sunshine.
The power supply of ASIN Salt must be designed in such a way that ASIN Salt is switched together with the
circulation pump of the filtration system.
The installation together with the regulator ASIN Aqua S is shown in the fig. 2.
The TE13 electrolyzer is installed in the outlet pipeline from the filtration system to the swimming pool. It is installed
in a direct part of a DN 50 pipe by sticking of the screw union onto the pipe and subsequent screwing. The
electrolytic cell is equipped with a 1.5 m long connection cable to ASIN Salt. The electrolyzer is always installed in a
horizontal position in the pipeline.
ASEKO s.r.o., Vídeňská 340, 25242 Vestec u Prahy
Tel. 244 912 210
Fax 244 910 800
[email protected]
http://www.aseko.cz