Download User Manual

User Manual
Edition January 2014
TEMPPO V6.1
Description of Use
3.1.2.1 Working with Projects
A project is the starting point in TEMPPO and contains one or more test
structures. You can either start by creating a new project or opening an existing
one. Deleting a project can only be done with the TEMPPO Administrator (see 5).
If you are an advanced user, you can skip this step and directly choose a
previously opened test structure in the Test Structure menu (see 3.1.2.2.3).
3.1.2.1.1 Creating a Project
A new project can only be created in TEMPPO Administrator. Log on to TEMPPO
Administrator and choose the tab Projects. Then press the button “New”. Figure
2 is displayed.
Project properties contains 4 tabs:
-General
-Roles
-Test Case Template
-Test Result Template
In the tab ”General” user specifies a unique name, description and the
possibility to determine if the testers have to add a mandatory comment for each
save operation of a test case.
In the tab “Roles” the test manager configures the roles for each tester. If a
user has no role in a project, he won’t see it.
In the tab “Test Case Template” the test manager appoints defines a basic test
case. He can configure standard attributes, define mandatory attributes or
determines if a test case has to be at least one link to a requirement. If these
conditions are not fulfilled the test case cannot be saved. For details see chapter
5.5.1.
In the tab “Test Result Template” the test manager configures result
attributes for test case. If a tester records a result and a test result template is
activated, he has to add a value for the mandatory attribute. For details see
chapter 3.3.3.2.
After pressing the button “OK”, the user is asked if he wants to assign
immediately meta data. If the user presses “Yes”, Figure 341 is shown.
Page 11