Download SMART Board User`s Guide
Transcript
2 Select the drawing tool you want to configure from the Tool drop-down list. 3 To change the width of the selected tool (the default is 2 pixels), scroll up or down in the Width box to increase or decrease line width. The width range is from 1 to 32 pixels. 4 Select the annotation color you want to produce from the 16-color palette under Color. Note the changes to the sample annotation in the Sample box. Make sure the visual appearance of the sample annotation is suitable before proceeding. Win Saving Pen Tray and Floating Tools Settings as User Profiles (Windows Only) Individual Windows users may want to save the changes they’ve made to the Pen Tray tools and Floating Tools in the form of a user profile. This profile can be saved and then opened whenever that user next uses the SMART Board. This means that multiple users of the same SMART Board, all with different tool needs and preferences, can tailor the Pen Tray tools and Floating Tools for their own purposes and never have to repeat the configuration procedure. Each user profile is stored as an STLS file in the SMART Board Software directory on your hard drive (wherever you installed the software initially). If you want to move a profile from one computer to another, you can either move the STLS file to a shared network directory or copy it onto a floppy disk and transfer it physically to the floppy drive on the destination computer. At this point, you’ll need to copy the STLS file into the destination computer’s SMART Board Software directory. To save your tools settings as a user profile: 1 Reconfigure the Pen Tray tools or Floating Tools as described on pages 17−21. As soon as you begin editing the settings, a user profile named Temporary will be assigned. If you want to keep these settings, we recommend that you save the user profile under a different name. 2 Press the drop-down arrow in the User Profiles text box. 3 Select Save As. A New Profile dialog will appear. The user name with which you logged on to your system will appear as the default profile name. 4 Accept the default profile name or type any name you prefer in its place. 5 Press the OK button. The new profile will appear as the currently selected user profile in the User Profiles text-entry box. 6 Press the OK button at the bottom of the SMART Board Control Panel to begin using your new user profile immediately. To delete a user profile: 22 1 Open Windows Explorer and navigate to the SMART Board Software directory on your hard drive. The SMART Board Software directory is likely located in your Programs folder. 2 Locate the .STLS file that corresponds to the user profile you’d like to delete. SMART Board User’s Guide