Download TFT Serials User Manual

2. User Management
Name: Input user‟s name with T9 input method.
FP (Fingerprint): Enroll employee‟s fingerprint. Ten fingerprints can be enrolled at
most.
The employee with fingerprint enrolled can use fingerprint to record attendance.
PWD (Enroll password): Enroll user‟s password. The effective digit is 1-8. The
employee with password enrolled can use password to record attendance.
Card: Registered staff's Card, only the registered card is possible to check
attendance.
Privilege: Users are people whose identity must be authenticated before enter a
menu. The ordinary consumer can track attendance by the card or the password only;
the manager already may equally carry on the daily checking attendance with the
ordinary consumer, but may enter the menu to operate each option.

Note: When there is no administrator, any person may enter the main menu
and operate; after the administrator is enrolled, no one can enter the main
menu until the administrator confirmed.
For example: the following is the flow for Add user.
1. Input User ID
1) Allocate User ID by default.
2) Press “
” to delete the allocated User ID by default. Input User ID from
keyboard. If the User ID is wrong, press “
” and input it again.
2. Input name
Use T9 input method to input employee‟s name.
Press OK or ▲/▼ to select “Enroll fingerprint”, then press OK to start fingerprint.
3. Enroll fingerprint
13