Download redsquare V3.indd - Analogue Solutions

Transcript
NOISE GENERATOR
The noise generator produces white noise. This is like the hiss you hear between
radio stations. It can be patched into the S+H for random effects or to the filter for 'wind'
and other sound effects.
NOISE signal output socket
The noise generator signal is output at full level from the NOISE socket - the NOISE
/ SUB level control does not affect the level.
SUB OSCILLATOR
SUB socket
The sub oscillator signal is derived from VCO1. It generates a square wave signal that
is the same pitch, but one octave below VCO1. It can be used to beef up sounds. The sub
oscillator signal is output at full level from the SUB socket. The NOISE / SUB control does
not affect the level. When using the Sub, it is best to leave VCO1's PW unmodulated.
EXTERNAL SIGNAL INPUTS
EXTernal SIGnal input socket
When you wish to filter external audio signals, for example synthesisers, effects processor, mixer effect sends, guitar, vocals, etc.; patch the signal into this socket. The signal
can then be attenuated with the EXT.SIG level control and is then fed to the filter input.
RING MODULATOR
The ring mod (RM) is an effect that combines two sounds to
produce interesting effects. I won't go into any technical details of
how (you can read up on this if you wish). The best thing is to use it
and listen to the results.
The RM needs two audio signals to work. You may wish to use VCO1 and VCO2 as
the sources. Patch their outputs to the RM X and Y inputs, and hear the result from the
RING MOD socket. Modulate either or both VCOs for maximum effect.
Alternatively, try one VCO as an input, and a second audio source such as vocals or
guitar.
PHOBOS
Red Square V3 e&oe (c) 1-9-2004
13