Download LabVIEW Data Acquisition Basics Manual

Index
external control
acquisition rate, 9-1 to 9-9
channel and scan intervals using
channel clock (figure), 9-1
channel clock control, 9-3 to 9-6
choosing between triggering and
external clock control, 4-4
description, 9-1 to 9-3
round-robin scanning (figure), 9-2
scan clock control, 9-6 to 9-8
simultaneous control of scan and
channel clocks, 9-9
update clock, 13-1 to 13-3
Generate N Updates-ExtUpdateClk
VI, 13-1 to 13-2
input pins (table), 13-2
supplying test clock from DAQ
device, 13-3
external conversions, 9-4 to 9-5
external devices, LabVIEW support for
(table), 2-7
EXTUPDATE* signal (table), 13-2
single-waveform acquisition, 7-2 to 7-3
strain gauge application, 21-15
waveform generation, 12-1 to 12-2
edges of signals, 23-2
EEPROM, for storing calibration constants,
22-1 to 22-2
default load area, 22-2
factory area, 22-2
user area, 22-2
elapsed time counting. See events or elapsed
time counting.
Error Handler VIs, 29-2
error handling
debugging VIs, 29-2 to 29-3
error in and error out output clusters, 3-8
Event or Time Counter Config VI
counting events
Am9513, 27-6
DAQ-STC, 27-4
counting time
Am9513, 27-11
DAQ-STC, 27-9
measuring frequency and period, 26-6
events or elapsed time counting, 27-1 to 27-12
adjacent counters for counter chips
(table), 27-2
connecting counters, 27-1 to 27-3
Am9513, 27-2 to 27-3
cascading counters (figure), 27-2
external connections (figures), 27-1
elapsed time, 27-8 to 27-12
8253/54, 27-12
Am9513, 27-9 to 27-10
TIO-ASIC and DAQ-STC,
27-8 to 27-9
events, 27-3 to 27-7
8253/54, 27-7
Am9513, 27-5 to 27-6
TIO-ASIC and DAQ-STC,
27-3 to 27-4
execution highlighting, 29-3
© National Instruments Corporation
F
filtering, 18-5
Finite Pulse Train (8253) VI, 24-18 to 24-21
finite pulse train generation, 24-14 to 24-21
8253/54, 24-18 to 24-21
DAQ-STC, 24-17 to 24-18
physical connections (figure), 24-14
TIO-ASIC, DAQ-STC, and Am9513,
24-15 to 24-16
Finite Pulse Train-Adv (DAQ-STC) VI, 24-17
Finite Pulse Train-Easy (9513) VI, 24-15
Finite Pulse Train-Easy (DAQ-STC)
VI, 24-15
Finite Pulse Train-Int (9513) VI, 24-15
Finite Pulse Train-Int (DAQ-STC) VI, 24-15
floating signal sources, 5-3
FOUT pin, 13-3, 24-21
I-11
LabVIEW Data Acquisition Basics Manual