Download LabVIEW Data Acquisition Basics Manual
Transcript
Chapter 6 One-Stop Single-Point Acquisition Multiple-Channel Single-Point Analog Input With a multiple-channel, single-point read (or scan), LabVIEW returns the value on several channels at once. Use this type of operation when you have multiple transducers to monitor and you want to retrieve data from each transducer at the same time. Your DAQ device executes a scan across each of the specified channels and returns the values when finished. Refer to Appendix B, Hardware Capabilities, in the LabVIEW Function and VI Reference Manual, for the number of channels your device can scan at one time. You also can refer to the LabVIEW Online Reference, available by selecting Help»Online Reference. The Easy I/O VI, AI Sample Channels, acquires single values from multiple channels. The AI Sample Channels VI performs a single A/D conversion on the specified channels and returns the scaled values in a 1-dimensional (1D) array. The expected range for all the signals, specified by high limit and low limit inputs, applies to all the channels. Figure 6-3 shows how to acquire a signal from multiple channels with this VI. Note Remember to use commas to delimit individual channels in the channel string. Use a colon to indicate an inclusive list of channels. Figure 6-3. Acquiring a Voltage from Multiple Channels with the AI Sample Channels VI You can benefit from using the Easy Analog Input VIs because you only need one icon in your diagram to perform the task, there are only a few basic inputs to the VIs, and the VIs have built-in error checking. However, the lack of programming flexibility with these VIs can be a limitation. Because Easy VIs have only a few inputs, you cannot implement some of the more detailed features of DAQ devices, such as triggering or interval scanning. In addition, these VIs always reconfigure at start-up. When you need a high-speed or efficiently run program, these configurations can slow down processing time. © National Instruments Corporation 6-3 LabVIEW Data Acquisition Basics Manual