Download User Manual - Temperature & Process Instruments, Inc.

3. Specifications (cont.)
3. Specifications (cont.)
c. DCA
g. Continuity Buzzer
Range
Resolution Accuracy
400µA
4000µA
40mA
400mA
4A
10A
Overload
Protection
0.1µA
±0.5% of reading,
1µA
±5 digits
0.01mA
0.1mA
0.001A ±0.75% of reading,
0.01A
±5 digits
Test Voltage
Threshold
Over Load Protection
3V
1000 digits
600 V DC or Peak AC
Fuse**(fast blow)
F600V, .5A, 31CM
Fuse**(fast blow)
F600V, 10A, 31CM
d. ACA
h. Capacitance
Range
10µF
100µF
1000µF
10,000µF
Resolution
0.01µF
0.1µF
1µF
1µF
Accuracy
±2% of reading,
±5 digits
Over Load Protection
600V DC or
Peak AC
±3% of reading, ±7 digits
i. Frequency
Range
Resolution Accuracy
Overload
Protection
400µA
4000µA
40mA
400mA
4A
10A
0.1µA
1µa
0.01mA
0.1mA
0.001A
0.01A
±0.75% of reading,
±5 digits
Fuse**(fast blow)
±1% of reading,
±5 digits
Fuse**(fast blow)
F600V, .5A, 31CM
Resolution
Accuracy
200.00Hz
2.0000kHz
20.000kHz
200.00kHz
0.01Hz
0.0001kHz
0.001kHz
0.01kHz
±0.05% of reading, 600V DC or
±2 digits
Peak AC
F600V, 10A, 31CM
l. General Specifications
Max. Volt. between
any Input and Ground
Fuse Protection
Display Type, Digital:
Analog:
Operating Temp.
Storage Temp.
Relative Humidity
e. OHM (Resistance, )
Range
Resolution Accuracy
Overload
Protection
400Ω
4kΩ
40kΩ
400kΩ
4MΩ
40MΩ
0.1Ω
0.001kΩ
0.01kΩ
0.1kΩ
0.001MΩ
0.01MΩ
600V DC or
AC Peak
±0. 5% of reading,
±5 digits
Range
Temp. Coefficient
±1% of reading,
±10 digits
Power Supply
Battery Life
Size (H x L x W)
7.4”)
Weight
Over Load Protection
1000V
mA: 0.5Amp/600VAC; A: 10Amp/600VAC
4,000 Count, 4 times per second update
2x41 segments, 20 times per sec. update
-0° to 40°C (32° to 113°F)
-20° to 60°C (-4° to 140°F)
0% to 80%: (0° - 35°C/32° - 95°F)
0% to 70%: (35° - 55°C/95° - 131°F)
0.1 x (Specified Accuracy) per °C for
temperature <18°C to >28°C
9 Volt Battery
100 hrs. Alkaline
33mm x 86mm x 187mm (1.3” x 3.4” x
380g (14.4oz)
f. Diode Test
Test Voltage
Max Test Current
Over Load Protection
3V
Approx. 2.5mA
600 V DC or Peak AC
**Warning: Use only correct size, voltage and current rated fuses.
Test Leads: Use only correct type and overvoltage category rating.
10
11