Download Manual - NSGate

6
qBRIDGE-100. Ethernet to G.703 Converter/Bridge
User’s Manual v.4
1.4. Connectors, LED indicators and DIP-switches
LEDs: LED indicators show state of qBRIDGE.
LEDs state:
PWR:
WAN LNK:
WAN ACT:
LAN 10M:
LAN 100M:
Connectors:
DC-IN:
LAN:
SW1:
WAN:
On when power is applied to the device
On when link established on WAN port
Blinking when receiving/transmitting data through WAN port
ON/Blinking when LAN port is in 10 Mbps mode
ON/Blinking when LAN port is in 100 Mbps mode
Device has LAN connector (RJ-45), WAN connector (RJ-45), power connector and DIPswitches.
7÷12 V DC power supply input for external power adapter
Ethernet 10/100BaseT (RJ–45 connector)
DIP-switches for device configuration (SW1.1 – SW1.8)
WAN port (RJ–45 connector)
NSGate