Download D3PLOT 12.0 user manual
Transcript
User manual Version 12.0, October 2014 D3PLOT 6.8.3 Data vs Data: Both X and Y data components against time. This is very similar to the Data vs Time panel above, except that you choose data components for both X and Y axes. Each item (here shells) still forms a curve, but the data points are <X data> vs <Y data> at each selected state. For example you might wish to plot the stress vs strain history for a set of elements, in which case you might choose: • X Axis: Strain • Y Axis: Von Mises stress Here is an example of output from such a plot, showing Von Mises Strain (X axis) against Von Mises Stress (Yaxis). This shows the classic stress vs strain curve for mild steel. Page 6.101
Related documents
D3PLOT 11.0 user manual
D3PLOT 9.4 user manual
D3PLOT 10.0 user manual
D3PLOT 9.3 user manual
LS-DYNA R7.0.0 (R7.79069) released Release notes for Version R7
T/HIS 12.0 user manual
Release Notes
Untitled - Oasys Software
TAGS01 パラメーター設定アプリケーション GTUNE 取扱説明書
documentation
Time Base Synchronization Module
MEN Mikro PU3 Manual