Download Emulex Driver and Utilities for Linux

elx_mes0719 - LUN Reset I/O flush failure: cnt <cnt>
DESCRIPTION: Timed out while waiting during a LUN reset.
DATA: none
SEVERITY: Information
LOG: LOG_FCP verbose
ACTION: If other errors are also occurring, please report this message to Technical Support.
elx_mes0720 - FCP command <cmnd[0]> residual overrun error.
DESCRIPTION: A residual overrun error has occurred while processing the specified FCP command.
DATA: (1) request_bufflen (2) resid
SEVERITY: Warning
LOG: LOG_FCP verbose
ACTION: If the problem persists, please check the targets for errors.
elx_mes0729: FCP cmd <cmnd> failed <target>/<lun> status: <status> result: <result>
DESCRIPTION: The specifed device failed an FCP command.
DATA: (1) ulpContext (2) iotag
SEVERITY: Warning
LOG: LOG_FCP verbose
ACTION: Check the state of the target in question.
elx_mes0730: FCP command failed: RSP
DESCRIPTION: The FCP command failed with a response error.
DATA: (1) resp_info (2) scsi_status (3) ResId (4) SnsLen (5) RspLen (6)rspInfo3
SEVERITY: Warning
LOG: LOG_FCP verbose
ACTION: Check the state of the target in question.
elx_mes0734: FCP read check error
DESCRIPTION: The issued FCP command returned a read check error.
DATA: (1) fcpDl (2) rspResId (3) fcpi_parm (4) cmd[0]
SEVERITY: Warning
LOG: LOG_FCP verbose
ACTION: Check the state of the target in question.
elx_mes0748: Abort handler timed out waiting for abort to complete:ret <status> D <target id>
LUN <lun id>
DESCRIPTION: The abort handler timed out waiting for abort to complete.
DATA: None
SEVERITY: Error
LOG: Always
ACTION: None required.
elx_mes0749: SCSI layer issued abort device
DESCRIPTION: The SCSI layer aborted a device.
DATA: (1) ret (2) id (3) lun (4) snum
SEVERITY: Warning
LOG: LOG_FCP verbose
ACTION: None required.
Driver for Linux - Troubleshooting Section
Page 137