Download IVC User`s Manual
Transcript
Video and Camera Connection Data The next set of parameters to define for this camera (shown in Fig. 24) has to do with how the camera communicates to the network. Figure 24 Video Server Every camera that will be connected to this video network has an IP encoder. This encoder may be a separate device (as in the case of IP-enabling legacy analog cameras) or integrated with the camera. In order for the Relay Server to communicate with this camera, it must know what type of IP encoder (Video Server) it uses. You can find this information for the camera being configured in the Camera Installation Guide shipped with the camera. Custom Software Leave as default unless directed otherwise by IVC Support. Video Feed Host/ Video Feed Port Enter the IP address and port number of this camera where indicated. Video Control Host/Video Control Port In rare cases for some PTZ cameras, the pan-tilt unit will have a different IP address than the IP encoder. If your camera is configured in this way, enter the unique control IP address and port number where indicated. Otherwise, enter the Video Feed Host IP address and port number in these fields. Consult your Camera Installation Guide for more information. RSS-4000 Series - Relay Server Guide 25