Download User Manaual
Transcript
L Series Satyrn Switches - User Manual Option Description Link Link direction State Displays the powered device’s current operation mode Current (mA) Displays the current drawn by the powered device Voltage (V) Displays voltage of the powered device Power (mW) Displays the power drawn by the powered device Determined Class Displays the power class. 5.1.8.3 Port control settings The following interface is used to set the individual port settings. The following table describes the options available. Options Description Port Port number. Enable state Click here to enable the PoE function for the specific port Power Limit From Classification Click here for the switch to auto detect the power requirement for the connected PD. Legacy The legacy detection is to identify the powered devices that do not follow the IEEE 802.3af standard. Once identified PoE switch can then provide power to these devices. Priority Sets port priority for the PoE power management. 1 = C (critical), 2 = H (High), 3 = L (Low) Power Limit (mW) Sets the power limit value. The value must less 25000mW Apply Click “Apply” to set the configurations. www.comtrol.co.uk L Series - Satyrn Switches 36